Thread: Culling brass

So I am currently culling a batch of brass. It's probably had 8 firings. With stout loads. There's been the odd separation so it's going under the microscope.
Of the batch of 500 it's looking like 15% aren't going to pass.
I just wanted to put this out there for discussion and information. It's been annealed every firing, it's had a cycle of 2 collet die loads then 1 bump die pass.To allow it to chamber with a two thousandth
bump. So not exactly what I would call overworked it's just near the end of it's useful life.



Tell me what you see from this lot.