Thread: DIY Inductive Annealer

This is the residual pattern (a la Lapua) left on mine. 350 lacquer on the left hand cases. Done with gas though, not induction. Had some done a couple of years ago in an induction machine and they came out the same in appearance as my gas ones. Don't know if any lacquer was used to set up the induction machine though.

And these are some that I took thru to ruination, just get a feel for the times involved. Again 350 lacquer, which of course is much more reactive than yours.
The glowing is a reference to what was happening when viewing inside the neck. Not sure you could do the same assessment with an induction machine.

Low temp lacquer started off with a strip from base to just under the shoulder.High temp is out of sight on the opposite side but all glazed.