Had no luck with 'one shot'. It couldn't even slide right into the bin!
Printable View
Had no luck with 'one shot'. It couldn't even slide right into the bin!
For years I have used graphite and laterly been using the redding ceramic bead mix.
I brush my necks then Amp anneal then FL resize.
Saying that graphite doesn't stick to the annealed brass doesn't ring true as if I miss a case I can tell pulling the button back out that it has no graphite applied.
I have been thinking about buying the press but I have decided I can't shoot any better than the ammo I make now so a waste for me.
If when I am seating a bullet and I notice it is variant to the rest I check it visually and the reason it is different is it is a different brand of brass every time.
My 2 cents
Sent from my SM-A226B using Tapatalk
So... Progress
The redding dry lube and ceramic balls applicator and I now use an expander mandril instead of an expander ball.
I have found this too that the graphite don't stick to annealed cases, before i used to never anneal and the graphite stuck to the neck just fine. but now that i anneal it all just falls off and my ES is higher. can still hit a deer at 600 so haven't looked into it too much more.
Hmm, I'm annealed and graphited so proof in the pudding i reckon!https://uploads.tapatalk-cdn.com/202...d0a97c876d.jpghttps://uploads.tapatalk-cdn.com/202...6e1aafeaf1.jpg
Sent from my SM-A226B using Tapatalk