Thread: Extraction problems

@stug thanks for the info on the collet die. I contacted Larry he was very helpful and sent one of to my wife's hotel pronto. Yes it works as well as the guff says. All problem brass has had the treatment and is now back to factory spec. You can even run loaded ammo through it with no problem. The top of the die acts as a go/ no go gauge. If it drops down to make contact with the belt no bother running it through the die. It is a very clever solution to the problem


Loaded round about to be sized

Top of die acts as a go/no go gauge note this case needs to be run through the die

Collet on loaded round

Die and collet