Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Terminator


User Tag List

+ Reply to Thread
Page 1 of 3 123 LastLast
Results 1 to 15 of 31
Like Tree8Likes

Thread: FL sizing vs Neck. Opinions

  1. #1
    Member
    Join Date
    Aug 2012
    Location
    Christchurch
    Posts
    4,606

    FL sizing vs Neck. Opinions

    What is every one doing in terms of re-sizing brass?

    WHen i first started reloading i heard everyone saying how much better neck sizing is so i rushed out and bought a die. At some point you need to FL size so i soon realised if i wanted to me more consistent with reloading then i might as well full length size to a slight crush fit, only fractionally bumping the shoulder. Havent done much reading on this so interested in what others do

  2. #2
    Member jim160's Avatar
    Join Date
    Jun 2012
    Location
    Wellington
    Posts
    3,111
    I full length resize everything. Used a neck sizing die once and every case jammed in the chamber.
    So I sold it and went back to full length sizing.

  3. #3
    Sending it Gibo's Avatar
    Join Date
    Feb 2013
    Location
    The Hill
    Posts
    23,480
    New as to the game. Neck size fire formed in my rifle and full length new brass or brass thats been fired in another rifle.

  4. #4
    Member
    Join Date
    Jun 2012
    Location
    lower hutt
    Posts
    1,048
    horses for courses theres no written rule on how or when to do it so long as it works for you and your happy with the results

    I shoulder bump/neck bush and neck size most of the time, and every so often which is like once a year maybe when they become hard to chamber, full length them

    annealing is good too

  5. #5
    ebf
    ebf is offline
    Mushroom juice ! Hic ! ebf's Avatar
    Join Date
    Jun 2012
    Location
    Above the Hutt
    Posts
    6,872
    shoulder bump 2 thou less than fireformed, then neck size using collet die

    i do this every time

    don't like the idea of neck, neck, neck then FL - rather have consistent sizing each time...
    Viva la Howa ! R.I.P. Toby | Black rifles matter... | #illegitimate_ute

  6. #6
    P38
    P38 is offline
    Member P38's Avatar
    Join Date
    Dec 2011
    Location
    Hastings
    Posts
    5,692
    I neck size for my BRNO 308 and other bolt action rifles.

    I full length size for my AR15

    As @scoped said above .... horses for courses

    Cheers
    Pete

  7. #7
    northdude
    Guest
    I just neck size. my loads except for 1 calibre run on the light side as through a lot of experimenting ive found that the fastest loads aren't nessecarily the most accurate
    Frogfeatures likes this.

  8. #8
    Member Marty Henry's Avatar
    Join Date
    Oct 2014
    Location
    Tararua
    Posts
    7,088
    Quote Originally Posted by northdude View Post
    I just neck size. my loads except for 1 calibre run on the light side as through a lot of experimenting ive found that the fastest loads aren't nessecarily the most accurate
    Agree totally with fastest isn't most accurate, one of the reasons we reload is accuracy, when you factor in the cost of equipment if you only shoot a little reloading isn't any cheaper shoot lots.
    But back on topic, factory ammo is neck sized till it needs trimming,scavenged brass is fl sized then length gauged before using once fired it's neck sized till it needs trimming then it gets a fl again. Bolt actions only here, I believe them new fangled automatic things need fl sizing that is if you can find the empties.
    PERRISCICABA likes this.

  9. #9
    Member Beavis's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    4,891
    Started neck sizing for my swede out of laziness TBH. Works well. Though I have had an "oh shit" moment in the bush with regards to feeding. Keep your chamber clean.

  10. #10
    Member Beavis's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    4,891
    Failure to properly size cases in anything but a bolt action can result in the action jamming solid.

  11. #11
    K95
    K95 is offline
    Member K95's Avatar
    Join Date
    Dec 2011
    Location
    Westland
    Posts
    889
    Hunting rifles I full length size eVerytime, bumping shoulder .002". Plenty of reloads from a lapua case so no reason to make it more complicated.
    Target rifle I used to use a competition neck die but I would also run the brass through a body die to bump the shoulder back .002". Just made the rounds concentric without a neck expander pulling things out of line.
    "Treat the Earth well. It was not given to you by your parents, it was loaned to you by your children.”

  12. #12
    sneakywaza I got
    Join Date
    May 2013
    Location
    Fairlie
    Posts
    3,588
    Full length size every single time, I want slick reliable feeding every round forever, the smallest amount of crap in the action (or miscalculation with the neck die) can ruin your week with a jammed action you can't sort in the feild. Have been down the neck size only route and learned that it generally makes no meaningfull difference to accuracy in a hunting rifle. Some Open and F class guys full length rather than neck, and their need for life and death accuracy would be greater than mine!

  13. #13
    sneakywaza I got
    Join Date
    May 2013
    Location
    Fairlie
    Posts
    3,588
    Quote Originally Posted by Gibo View Post
    New as to the game. Neck size fire formed in my rifle and full length new brass or brass thats been fired in another rifle.
    That 308 Lapua brass I sent you is Full Length sized, so is good to go in the wee M7, just in case you wondered!

  14. #14
    Sending it Gibo's Avatar
    Join Date
    Feb 2013
    Location
    The Hill
    Posts
    23,480
    Quote Originally Posted by 257weatherby View Post
    That 308 Lapua brass I sent you is Full Length sized, so is good to go in the wee M7, just in case you wondered!
    Yeah mate all good, have chambered a couple and they feel ok. Still to lazy to get my dies etc sorted. Getting reloaders vouchers (man cash) for xmas so will be early next year

    So do we lose brass life if we full length everytime?

  15. #15
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,972
    Quote Originally Posted by Gibo View Post

    So do we lose brass life if we full length everytime?
    not if your primer won't stay in by the 3rd reload


    Sent from my GT-S5360T using Tapatalk 2
    Gibo likes this.
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

 

 

Similar Threads

  1. Neck sizing .338 brass
    By ARdave in forum Reloading and Ballistics
    Replies: 16
    Last Post: 25-05-2013, 12:07 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!