Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Ammo Direct DPT


User Tag List

+ Reply to Thread
Results 1 to 15 of 31
Like Tree8Likes

Thread: FL sizing vs Neck. Opinions

Hybrid View

  1. #1
    Member
    Join Date
    Dec 2012
    Location
    Wellington
    Posts
    1,786
    "Wouldnt this cause more issues with inconsistency? " not sure what you are asking here.

    This is what I do.

    For my 308w I have 400 lapua match grade cases and as I fire them (24 per weekend) I throw them in a 3litre systema box until all my 308w ammo is used up. The top of the box has a paper sheet taped to it and I mark it up as I go along.

    I then neck resize it, length size it using the Lee quick trim (every time as it chamfers as well) all at once and that goes into another 3litre systema, I have a wilson 308w chamber gauge and I measure the cases as I do this.

    I then prime and load and they go into a 2litre systema (smaller so it fits my ammo safe).

    I have not bought a Reading 308w shoulder bump die yet but I will. However Ive not had the need yet and I can always use the club's one if I had to. If I found 1 that was stretched I'd inspect it very carefully and if its not dodgy I'd do them all. For 308w so far I have only ever Lee neck sized the cases but then my load at 45gr 2208 is moderate and the massive Millenium actions dont stretch.

    I do the same for the 303british cases but I find after 2 ~4 neck sizes I usually have to full resize (if they go into a No4) but once I see that I do them all. For the Pattern 1914 / no3 there seems to be less signs of stretch so the brass might last a lot longer. So I also have a brass manufacturer per rifle, privy for no 4 target, Winchester for the p14, 1943 for no4 wsra. Each gun has its own colour coded systema box set for its brass.
    "I do not wish to be a pawn or canon fodder on the whims of MY Government"

  2. #2
    Member
    Join Date
    Aug 2012
    Location
    Christchurch
    Posts
    4,631
    Quote Originally Posted by steven View Post
    "Wouldnt this cause more issues with inconsistency? " not sure what you are asking here.
    yeah but you're 3 loads that are only neck sized are likely going to have a different neck tension/concentricity/internal capacity than the one you FL size... All of this could result in a slight difference to POI could it not.

    Edit: yeah that is what i'm getting at @ebf. If we are searching for overall consistency every shot we should be doing the same process every shot i reckon. Like if i was going to anneal i would see sense in doing it every firing rather than every 3rd firing or whatever.
    ebf likes this.

 

 

Similar Threads

  1. Neck sizing .338 brass
    By ARdave in forum Reloading and Ballistics
    Replies: 16
    Last Post: 25-05-2013, 12:07 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!