Thread: Genex small rifle primers

Tried these today for something to do. Usually use CCI 400 under the 20g Vmax in my 17H. They were a little tighter to seat as per internet findings. Was confident enough to just run the usual load after earlier mucking around with doing load development with some Berger 25g.

The 20g Vmax + CFE BLK load is one that runs 0.5moa or less and i know there's a few others running pretty similar on the forum. Ran out of prepped brass to make up for the bad group but its still <.5. I'll happily switch to these in future for this gun.