Help design the NZHS Forum Wildcat - Part 3 - Case

[leathel]

would you need to shorten the SAUM? extend the mag box a bit .... shorten the neck a tad blow it out parrallel with a sharper shoulder and get very close to WSM capacity in a shorter case..

or the short 284... but its allready pretty parallel and has a pretty sharp shoulder so not too much modded...not cool enough

Or utilize the small primer 308 brass, blow it out shorten the neck.... look a bit different to std then

or just neck it down to 7-08 and it will do the job

still like the 338 better