Help design the NZHS Forum Wildcat - Part 3 - Case

Printable View

Show 40 post(s) from this thread on one page

19-09-2013, 12:08 AM
Steveh054

Quote:

Originally Posted by Toby

So whats happening with this now?

Lots of excited replies for your question Toby
24-09-2013, 07:36 PM
distant stalker

Think it requires spanners being in the country more than 5 minutes at a time for there to.be some progress
24-09-2013, 08:18 PM
Spanners

I've been holding off finishing the order as have been waiting for the prints for the 44 Claymore reamer
Just heard from him with the bullshit excuse that can't give them to me because of ITAR
What a fucking load of shit, there are reamer prints all over the net and on the reamer makers website

I'm home next week, so will draw the 44 up myself and get it in with the 7mm
24-09-2013, 08:20 PM
Toby

Have you found a 44 barrel?
24-09-2013, 08:21 PM
Spanners

I told you I have the barrels covered :)
Read and let the info soak in :)
24-09-2013, 08:24 PM
Toby

Shit. Well thats good then. I started making plans for a .260ai because I couldnt find a 44. But nevermind back to 44 which is good.
25-09-2013, 01:01 PM
R93

Quote:

Originally Posted by Toby

Shit. Well thats good then. I started making plans for a .260ai because I couldnt find a 44. But nevermind back to 44 which is good.

You have to be slightly challenged to run/own a .260 AI Toby. If you walk up a city street, and just have to touch every parking meter, you may just start to qualify.;)
25-09-2013, 01:10 PM
Toby

Quote:

Originally Posted by R93

You have to be slightly challenged

I thought it was clear I was
25-09-2013, 02:22 PM
Neckshot

Quote:

Originally Posted by R93

You have to be slightly challenged to run/own a .260 AI Toby. If you walk up a city street, and just have to touch every parking meter, you may just start to qualify.;)

Must have a accasional fat girl oiled up fetish,cant take your self to seriously either other wise don't call your self a kiwi bloke who likes more than just the mainstream cal's, but I cant say to much as im not cut out for shooting!!!.
25-09-2013, 02:35 PM
R93

I will admit to being challenged, but I have never been in to fat chicks like you Neckers......oily or not:D
25-09-2013, 05:16 PM
veitnamcam

Quote:

Originally Posted by R93

You have to be slightly challenged to run/own a .260 AI Toby. If you walk up a city street, and just have to touch every parking meter, you may just start to qualify.;)

Its just a bit worse than 6mm08 eh ;):D:D:D

Sent from my GT-S5360T using Tapatalk 2
25-09-2013, 06:25 PM
R93

No Cam, it is not. Your sexual persuation has to be questioned owning any 6mm.;) I would just rather be retarded:D
25-09-2013, 07:00 PM
veitnamcam

:D:D:D

Sent from my GT-S5360T using Tapatalk 2
25-09-2013, 07:28 PM
Neckshot

1 Attachment(s)

Quote:

Originally Posted by R93

No Cam, it is not. Your sexual persuation has to be questioned owning any 6mm.;) I would just rather be retarded:D

so what dose borrowing a 6mm for years make you?????.................bi retarded:D swinger:thumbsup:.I know your mates have a cruel sense of humor as they own poo 4 free's just to anoy you:D
Attachment 14622
oooohhhhh love that shit Davo!!! ummmm stop it stop it!!!;)
25-09-2013, 08:02 PM
R93

I was all of the above when I used one, obviously. I seen the light and even managed to avoid fat chicks in oil when I changed cals.
None of my mates that I hunt with, own a 6mm in any variety.

Show 40 post(s) from this thread on one page