Printable View
Can't recall if this is covered here somewhere, but what are reloaders go to solutions that get the job done? home made or brought solutions?
Have a Hornady LNL heated model, I notice that it states not to use Lasso case cleaning solution will damage the tank....
Cheers
Baz
From half to a teaspoon of citric acid (from the baking section at the supermarket) and hot water.
Rinse and done.
;)
I found leaving brass to soak over night and then sonic them makes cleaning heaps better
Only a small one at the moment, 400mils, got a 2ltr one coming.
Decap and a quick scritch of the primer pocket and into the cleaner. I use white vinegar( don't leave cases in overnight !! ) usually give them about 45 min, take 'em out, rinse in hot water(helps with the drying) with a bit of baking soda dissolved in it ( this neutralizes the vinegar and prevents the darkening/staining of the brass ) and then a good shake out of excess water, then into an open container and into the oven for a while or leave them in the drying cupboard for a day or two. If you want super shiny cases then chuck 'em in the tumbler, but personally I think thats over the top ;)
Simple green or Enviroclean (same same) is what we're used in ultra sonic tanks on the ship for years
That enviro clean a tergo product spanners ,,,same stuff i use at work i think
Yip - thats the oneQuote:
Originally Posted by Bushrash
One of the big name 'carbon removers' you buy for a fortune at the gun shop is nothing more than Enviro Clean and a touch of soluble oil
Yip - thats the oneQuote:
Originally Posted by Bushrash
One of the big name 'carbon removers' you buy for a fortune at the gun shop is nothing more than Enviro Clean and a touch of soluble oil
You may need to move out of the room SpannersQuote:
Originally Posted by Spanners
You have developed an Echo Echo :D
Sttttaaaaammmmeeeerrrring Satellite internet
Sweet will give it a crack sonic cleaner should be here this weekQuote:
Originally Posted by Spanners
Up to 50/50 enviro and warm waterQuote:
Originally Posted by Bushrash
Give them a good rinse afterwards
Sweet will let ya know how i get on,,, i guess the main thin with any solution would be to steer clear of anything with ammonia in it ??ive heard it can mess with brass?? is this right??Quote:
Originally Posted by Spanners
Ya
Enviro is simple the ducks so why bother with anything else? :D