My local only stocks hornaday and I like to shop local.
They alright?
Printable View
My local only stocks hornaday and I like to shop local.
They alright?
Yep nothing wrong with them.Quote:
Originally Posted by muka88
Dies generally arnt the limiting factor in accuracy!
Sent from my SM-G950F using Tapatalk
Ive got a few different die sets, including competition sets, I have a few of the Hornady new dimension die sets (with the sliding sleeve on the seater die) they make just as good ammo as any of the others.Quote:
Originally Posted by muka88
I like my new dimension ones, very nice to use.
They do come with a internal protective coating that needs to be cleaned off before use.
I have them for 223/7mm08 cals, and found them to be really tight. I wonder if that's the reason.Quote:
Originally Posted by tetawa
How'd you clean them ?
Did the same as you and bitched to the retailer, he said did you clean them first, no. Dissembled and used Brake Clean, problem disappeared.
Also changed over to Imperial case sizing wax a few years ago, have also found that great.Quote:
Originally Posted by Max Headroom
Hmmmm.Quote:
Originally Posted by tetawa
Can you give yours a scrub and let me know how you get on please?Quote:
Originally Posted by Max Headroom
Imperial sizing wax, do it, it's perfectionQuote:
Originally Posted by Max Headroom
Aye aye.Quote:
Originally Posted by muka88
I gave my 223 sizing die a scrub and wash out with brake cleaner, and ran 30 or so cases through. Now they seem to get hung up on the expander ball and come out with a bang when they go past it, which hasn't happened before.
I polished the expander ball in case that was the problem, but the same thing happened.
I also increased the amount of case lube in case that was the problem. Still they stuck.
Maybe I'm having a bad day, which right now wouldn't surprise me.
In case I'm not, I don't recommend Hornady custom grade sizing dies.
That said, I use the seating die from the same pack, as I'm told by John Herbert (Herbmeister to those of you from Sportshooter forum) that it does a really good job.
I tend to mix and match dies these days, so I cherry pick from sets to do what I want.
Lee - sizing/decapping die
Hornady - seating die
Lyman - M die (for belling the case mouth for flat base projectiles)
Lee - crimp die
I never use expander balls in any of my dies these days. I expand with a K&M mandrel first then bushing neck die on outside turned cases to get precise tension. Before I arrived at this way of doing things seating projectiles seemed to require different force every time. Now they all seat just the same.
I never liked dragging an expander ball back through my case necks.
Just my way and I know there are a thousand answers to the same question in reloading, but this works for me.
Thank @Max Headroom might make the trip down to reloaders and see what they haveQuote:
Originally Posted by Max Headroom
most of my dies are hornady perfectly fine i use mine in a rcbs rock chucker pressQuote:
Originally Posted by muka88
yeap bloody good wax, a little goes along way.Quote:
Originally Posted by tetawa
Ask them their take on Hornady dies. They might have another point of view on it. Reloaders are pretty good.Quote:
Originally Posted by muka88
Do you lube the inside of your case necks with graphite powder? I have no problems at all with my 3 sets of Hornady dies, but I do dip every case neck in graphite powder before I size it.Quote:
Originally Posted by Mauser308
I lube the cases but NOT the neck, dip the neck in graphite powder.
To stop that just rub the inside of the neck with graphite powder with a worn out brush with a patch wrapped around it.
Guaranteed to work!
Sent from my SM-G950F using Tapatalk
I'm sure that will work. The thing that grates me a little about this is that I wouldn't have to do that with a lee die.Quote:
Originally Posted by andyanimal31
The Lee colett die you dont but any thing with an expander ball no.Quote:
Originally Posted by Max Headroom
Sent from my SM-G950F using Tapatalk