Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Terminator


User Tag List

Results 1 to 9 of 9
Like Tree24Likes
  • 6 Post By Tahr
  • 1 Post By Ryan_Songhurst
  • 1 Post By nor-west
  • 1 Post By Tahr
  • 2 Post By Tahr
  • 1 Post By Woody
  • 1 Post By johnd
  • 11 Post By Tahr

Thread: Hot Stuff

Threaded View

  1. #1
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    13,377

    Hot Stuff

    I bought a near new/second hand XBolt stainless in 270wsm. Docked the barrel back to 22" and used loads that had worked well in a previous Sako A7 (now a 300saum) and loads I pinched from Ryan off here. 150 VLD and LRAB. New norma cases. Saami OAL.

    Velocities should have been around 3050fps according to my data I had from the past, quick-load and Ryan's experience. But yikes! Every case had vicious ejector marks and flat primers and velocities were all 100 fps faster than expected. Up to 3149fps. I tried N550, AR2225 and HV100

    So I need to drop all of the loads I tried by at least a grain. Its a good lesson about every rifle is different. This one must have a tight chamber.

    The good thing was that it shot very well, especially with the new trigger spring that @Boaraxa put me onto from the States.

    Name:  IMG_0168 2.jpg
Views: 704
Size:  61.0 KB

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!