Thread: I don't make things easy for myself... Die help requested.

so you know you can resize the walls of body with a 204 die..but neck will be squished inwards too much...but if you cut the top off it would do the sides..leaving neck n shoulders to do.... IF the shoulder angle is the same as the 204 you can do that bit too,just leaving neck itself to be sized now the redneck in me says you could do it with and 6mm die if you cut enough off its bum
you could infact do the neck BEFORE doing the body and if these fellas on here are correct you wont need a expander ball at all simple slip your boat tailed projectile into sized case and let it open neck up itself...
there just has to be an easy way to do this