I have a cunning plan

Quote:

---

Originally Posted by mikee

pity you have none in .375 :( Or i might be able to give the penguin a run for his money

---

You shouldn't say that it may bite you in the butt, I do have a .375 250 grain mould don't use it much it is a flat base good for up to 1400fps turn your .375 H&H into a 38/55
I have to dig it out a couple of friends need a few bullets can add you to the list if you want:)

@mikee. Bring it on

Quote:

---

Originally Posted by shooternz

You shouldn't say that it may bite you in the butt, I do have a .375 250 grain mould don't use it much it is a flat base good for up to 1400fps turn your .375 H&H into a 38/55
I have to dig it out a couple of friends need a few bullets can add you to the list if you want:)

---

Ok. Youre on. Ill take a couple hundy if they arent to pricey

Quote:

---

Originally Posted by shooternz

You should up the load a bit mine does 1040fps and groups 1/2" at 50 metres and 1.4" at 100 metres a little more speed may tighten your group

---

tried 9 grains and was quite noisey, didnt check it over a chrony, but the group did tighten up. Will try between 8.5 and9 grains and see what this will do. Thanks

Quote:

---

Originally Posted by mikee

Ok. Youre on. Ill take a couple hundy if they arent to pricey

---

They are $25.00 /100 plus freight you sure you 200 to start with your rifle may not like them.

Quote:

---

Originally Posted by shooternz

They are $25.00 /100 plus freight you sure you 200 to start with your rifle may not like them.

---

OK a hundy tp start then, just wasn't sure what your minimum order would be??

Quote:

---

Originally Posted by mikee

OK a hundy tp start then, just wasn't sure what your minimum order would be??

---

You be wanting some trailboss now then ?