Thread: Lapua 308 brass resizing to 260

Thanks for the great replies. Good to see the voice in my head speaks to others the same way!!

With regard to the resizing option, I’ve read that there is some advantage to passing the brass through a 7mm08 FL die first. Opinions??

Also, I’m not setup for neck turning. Is it worth it for this onetime exercise or will it be a process that I’ll utilise in future reloading endeavours??

Originally Posted by Sidetrack

Thanks for the great replies. Good to see the voice in my head speaks to others the same way!!

With regard to the resizing option, I’ve read that there is some advantage to passing the brass through a 7mm08 FL die first. Opinions??

Also, I’m not setup for neck turning. Is it worth it for this onetime exercise or will it be a process that I’ll utilise in future reloading endeavours??

take Jhon up on offer to swap....in the long run you will be happier as headstamps are correct....
Ive done .270 into 30-06 and other way around and 270 into 25/06 but in all cases (pun intended ) it was to finish off a batch and the fired cases were chucked afterwards...

Originally Posted by Micky Duck

take Jhon up on offer to swap....in the long run you will be happier as headstamps are correct....
Ive done .270 into 30-06 and other way around and 270 into 25/06 but in all cases (pun intended ) it was to finish off a batch and the fired cases were chucked afterwards...

100% this if unsure

I necked straight down from .308 no neck turn

Try sizing just one. Put a projo in and see if it chambers

Originally Posted by johnd

Try sizing just one. Put a projo in and see if it chambers

Chamber the brass first as it might take several attempts to get it bumped correctly . That’s what I did anyway to the naked eye it looked mint but was a crush fit so I just kept taking it back in tiny bits until it chambered nicely then added the projectiles worked a charm

Thanks for all the input. Much appreciated. Has clarified my thoughts on the subject.

The engineer in me likes things neat and tidy and I also made a pact with myself, when I started collecting gear and components, that I would apply the KISS principle from day one and take a minimalist approach to reloading. Just have what I need and not what I want.

I’ll swap/sell them out.

Cheers all.