Thread: Lee bullet seating die issues

Originally Posted by zeropak

Looks to me Like you have way too much neck tension. You need to look at the neck sizing, If you are using the collet sizing die then back it off. The guy at Serious Shooters is correct. I looks like a few people Knocking lee dies, I have never had any issue with them, the collet neck sizing die is very innovative and works very well if it is adjusted correctly. I reckon Lee gear is great value for the money.

For all that a few knock Lee there are many thousands using them both to compete and put meat on the table. That said, any mass produced product will have a percentage of faulty items. Like most of the major US suppliers Lee have a darn good warranty service even to NZ. When someone like Nathan Foster's into print recommending Lee dies for excellent Concentricity Intend to pay attention. While there may be a manufacturing issue, its the nut behind the wheel that causes the most problems. Thank you Richard Lee for all you've done to make reloading accessible and affordable literally to millions.