Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Night Vision NZ Ammo Direct


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 19
Like Tree22Likes

Thread: Lee loader kit

  1. #1
    Member
    Join Date
    Apr 2019
    Location
    Tauranga
    Posts
    743

    Lee loader kit

    Does anyone use the simple Lee loader kit or are they just too slow?
    I’ve never reloaded but when components are available again I would like to load some subsonic 308 loads. The Lee loader kits only about $80 so a cheap way to try it out.
    Bol Tackshin likes this.

  2. #2
    Member
    Join Date
    Jul 2019
    Location
    Palmerston North
    Posts
    339
    I used to have one for .308 and .303 and if you are loading for the same rifle they are great especially if you don't have any other reloading equipment.

    They are not slow and Lee claim that they are the fastest way to reload.
    You may want to buy a set of Lee powder scales if you want exact measurements but the dippers are generally good enough for most applications.
    Bol Tackshin likes this.

  3. #3
    Member
    Join Date
    Jul 2022
    Location
    Nelson
    Posts
    38
    I've got the simple Lee "Challenger Press" and it's awesome. Richard Lee's book - Modern Reloading - says if you're loading 200 a week, go for the multi-station Turret Press. I'm new to the game and found that doing small batches (about 10 at a time) allowed me learn stage by stage as opposed to the "assembly line" Turret Press method. The "Breech Lock Quick Change Bushings #90600" make changing the Dies easy and maintain your settings too. I use the Collet Resizing Die and the Trimmer Deluxe Quick Trim. I've got the Lee "Perfect Powder Measure" but prefer to measure by hand; perhaps I'll get a bit more confidence in it later. Reloaders Supplies has got virtually everything and they're really helpful. I ordered direct from Lee USA an Undersize Mandrel (which I didn't need - my technique needed to change) and they were pretty good too. In short I'm a Lee disciple and whilst I'm sure there's other good gear out there, I don't think you can go wrong with Lee.
    m101a1 likes this.

  4. #4
    Member
    Join Date
    Apr 2019
    Location
    Tauranga
    Posts
    743
    Quote Originally Posted by PeteD View Post
    I used to have one for .308 and .303 and if you are loading for the same rifle they are great especially if you don't have any other reloading equipment.

    They are not slow and Lee claim that they are the fastest way to reload.
    You may want to buy a set of Lee powder scales if you want exact measurements but the dippers are generally good enough for most applications.
    Thanks, good to know, it will be for a single rifle. Bugger I can’t get trailboss.

  5. #5
    Member
    Join Date
    Dec 2014
    Location
    canterbury
    Posts
    6,243
    Quote Originally Posted by Bushline View Post
    Thanks, good to know, it will be for a single rifle. Bugger I can’t get trailboss.
    This from the ADI site

    "Trail Boss – This propellant is unlikely to be released in 2022 as there continues to be an active research and development project associated with its manufacturing optimisation."

    So it looks like a long shot on seeing any soon
    ADI has stopped making pistol powders

    It would be interesting to know what the future of powder availability for domestic use is likely to be
    The Church of
    John Browning
    of the Later-Day Shooter

  6. #6
    Member Ground Control's Avatar
    Join Date
    Oct 2012
    Location
    Australia / Marlborough Sounds
    Posts
    1,357
    If your only loading a handful at a time and just want to shoot things at reasonable distances then they are a great piece of kit .

    Things to be aware of .

    They only Neck size .
    Hammering in the primer’s is not something I like to do , so maybe factor in a hand primer
    The powder scoop works , but personally I think a simple beam scale is needed to get best results.

    I really like my .223 set .
    I don’t use it much but it’s a really handy thing to have and I think that every new reloader would be better off if they loaded their first 100 rounds with one .
    The process is a really simple way for people to understand the basic foundations of the way that a cartridge is made / assembled and what it is comprised of .
    I can produce ammo that shoots under an inch with my set , but if you get the reloading bug you will end up with a room full of reloading gear like me
    Bol Tackshin and Micky Duck like this.
    FALL IN LOVE WITH THE NUMBERS , NOT THE IDEA

  7. #7
    Member
    Join Date
    Jun 2023
    Location
    waimakau
    Posts
    3,646
    Nothing wrong with them. I have loaded the same ammo with one and a press to do a comparison and the ammo was just as accurate. As others have said just get some scales as well, even some digis will do. Ive got lee loaders for a few different calls I shoot

  8. #8
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,816
    great wee bit of kit....would be happy man if had set for each calibre I use. dead easy to use and makes good ammunition that is on par with factory stuff other than top of the line. the scoop will give you nice mild loads...a wee set of balance bean scales allow you to SAFELY up your charge weight a little.
    with a set of these, whackamole and a manual...you good to go.
    Croc likes this.
    75/15/10 black powder matters

  9. #9
    Member Oldbloke's Avatar
    Join Date
    Jun 2020
    Location
    Victoria Australia
    Posts
    615
    Quote Originally Posted by Ground Control View Post
    If your only loading a handful at a time and just want to shoot things at reasonable distances then they are a great piece of kit .

    Things to be aware of .

    They only Neck size .
    Hammering in the primer’s is not something I like to do , so maybe factor in a hand primer
    The powder scoop works , but personally I think a simple beam scale is needed to get best results.

    I really like my .223 set .
    I don’t use it much but it’s a really handy thing to have and I think that every new reloader would be better off if they loaded their first 100 rounds with one .
    The process is a really simple way for people to understand the basic foundations of the way that a cartridge is made / assembled and what it is comprised of .
    I can produce ammo that shoots under an inch with my set , but if you get the reloading bug you will end up with a room full of reloading gear like me

    Spot on
    57jl likes this.
    Hunt safe, look after the bush & plug more pests. The greatest invention in the history of man is beer.
    https://youtu.be/2v3QrUvYj-Y
    A bit more bang is better.

  10. #10
    Member
    Join Date
    Apr 2017
    Location
    The 'Naki
    Posts
    2,480
    Great kit. Have one for every calibre I reload. Use them regularly for the sheer pleasure of it. If you're fastidious you can even win bench rest comps reloading with one- been done famously in the US. Ignore the "hammering primers" comments. You'd have to be an idiot and smash down real hard to set a primer off as the bearing surface, like in a press or hand primer, is the full surface of the primer. Rather than hammering the primer in, its more soft tapping and works just fine.
    I know a lot but it seems less every day...

  11. #11
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    3,073
    Greetings All,
    Much in line with the above comments I use them for low pressure loads in my .303 rifles. These cases will likely never need FL sizing although I could do this in an old vice die I have. They size the necks very straight, straighter than many press mounted dies. I do run a .311 expander button in and out of the necks on the press but could probably drop that step. In the interests of science I did seat just one primer with the hammer, wearing a full face shield, but now use a hand primer. Charges are weighed and for convenience projectiles seated in the press but seating in the Lee Loader die is at least as good. For subsonic loads in a .308 together with some scales and a hand primer they should do the job.
    Regards Grandpamac.
    kristopher likes this.

  12. #12
    Member zimmer's Avatar
    Join Date
    Oct 2012
    Location
    Waikato
    Posts
    4,986
    I've only had the Lee 12 gauge kit. Made great ammo if a tad slow.
    Hammering in the primers never excited me but I had no alternative method to seat them, not like with my rifle stuff. Always kitted up with safety glasses but do that at any rate when seating rifle primers with my current primer tools.

  13. #13
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,816
    with the shotgun primers I found could just lean down on to cases placed on hard flat table top and they seated perfectly.
    I use a rubber hammer for primer seating using the kit,watching to rod you can see when it moves down,a slight champher of primer pocket lips helps no end at anytime and very much good for this.
    75/15/10 black powder matters

  14. #14
    Member Oldbloke's Avatar
    Join Date
    Jun 2020
    Location
    Victoria Australia
    Posts
    615
    Just an additional comment. Yep, they are great. But in the long run your likely going to want to go the next step.
    So, suggest you keep your eyes peeled for bargains for decent used reloading gear.
    Hunt safe, look after the bush & plug more pests. The greatest invention in the history of man is beer.
    https://youtu.be/2v3QrUvYj-Y
    A bit more bang is better.

  15. #15
    Member
    Join Date
    May 2019
    Location
    Christchurch
    Posts
    99
    If you see a second hand one don't be scared of buying one just to try. You will be able to sell it for the same money if you decide to move to a press.

 

 

Similar Threads

  1. new loader help
    By Konev in forum Reloading and Ballistics
    Replies: 5
    Last Post: 24-09-2012, 09:24 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!