Thread: Light Primer Strikes

Because it has been reamed AI, I would be doubtful that the dies and chamber are matched. The chamber may well be slightly longer than the full length sized case. I have a 2506 AI and it has this very situation.
All I do is neck size and slightly brush the shoulder of the fired cases if they need it, then run them all through the rifle to make sure they chamber - Ackleys dont stretch.
Please check a fired case by priming it without sizing and testing if the primer fires

Originally Posted by Moa Hunter

Because it has been reamed AI, I would be doubtful that the dies and chamber are matched. The chamber may well be slightly longer than the full length sized case. I have a 2506 AI and it has this very situation.
All I do is neck size and slightly brush the shoulder of the fired cases if they need it, then run them all through the rifle to make sure they chamber - Ackleys dont stretch.
Please check a fired case by priming it without sizing and testing if the primer fires

Okay Ill run a few rounds with fire cases and see where that gets me. Did this eliminate the issue or do you still have a few cases misfire? Also how often are you pushing back your shoulder?