Load for 7saum 162eldm rl26

Just having a play with the above load
Only done two three shot groups so far but looking promising with around half moa @100 yards. Haven't chronnied.

Is anyone else using this load in there saum?
Looking for jump and powder charge suggestions.

Currently at 10 thou jump and 63.5 grains

Cheers G

Yep, 63.2gn was sweet spot in my 7SAUM. 3000fps 22in bbl

68 or 69g of ADI 2217

162g 3030fps -3080 fps

Quote:

---

Originally Posted by chainsaw

Yep, 63.2gn was sweet spot in my 7SAUM. 3000fps 22in bbl

---

Thanks mate will work around that. What was your jump?

From memory around 10thou, but need to check my log book tomorrow. Ran ladder up to 64.2gn and first saw pressure at 63.8gn. Running multiple loads at 63.8 definitely got heavier bolt lift on 2nd & 3rd rounds. At 63.5 stiff bolt lift on 3rd round. Treat with care, your rifle may be different

Quote:

---

Originally Posted by chainsaw

From memory around 10thou, but need to check my log book tomorrow. Ran ladder up to 64.2gn and first saw pressure at 63.8gn. Running multiple loads at 63.8 definitely got heavier bolt lift on 2nd & 3rd rounds. At 63.5 stiff bolt lift on 3rd round. Treat with care, your rifle may be different

---

I jammed the buggers same as the 180 3060fps for around 64gns

This was running RP brass

Correction, my load at 50 thou jump

Quote:

---

Originally Posted by chainsaw

Correction, my load at 50 thou jump

---

Thanks. They don't seem too fusy on jump in my 08