Thread: Lube Cases?

If you are going to use One Shot for FLSing best invest in a stuck case remover. The other thing with One Shot is u must make sure it has dried before sizing.

Originally Posted by zimmer

If you are going to use One Shot for FLSing best invest in a stuck case remover. The other thing with One Shot is u must make sure it has dried before sizing.

No just neck sizing but no one said anything about drying. Thanks

Just take 7mmsaum's advice and get a tin of Imperial sizing wax, since ive been using it, never had a problem with a stuck case, prior to the imperial i did.

One little pot basically lasts forever, great value and is the best IMO.

Originally Posted by GWH

Just take 7mmsaum's advice and get a tin of Imperial sizing wax, since ive been using it, never had a problem with a stuck case, prior to the imperial i did.

One little pot basically lasts forever, great value and is the best IMO.

I've looked at the wax but thought it would be messy to apply. Putting some on a cotton bud for the inside of the neck and then smearing some on the outside. Wouldn't a spray be easier? One squirt on an angle would get both the inside and outside of the necks??