Printable View
Just bought a Lyman lube/ seizing die wtf spend an hour sizing 1 projectile. It will be modified tomorrow so it works
Only sizing pure lead to .451 cal from about .452, just kept jamming in the die and I had to punch out. Even sizing them thru my non lube .451 die and then thru the lube they jammed, I've got something wrong, everything measures Ok? Any help appreciated.
Al mine hopefully be sized, lubed and wrapped in onion paper, they won't even touch the barrell! But red tips are Ok just a bit faster?Quote:
Originally Posted by Tussock
what sizing press are you using it in I use both lyman and rcbs in my rcbs lube a matic with no problems
The projectile which I sized to .451 in my non lube press when put thru the Lyman lube press with the same size die seems to hydraulic on the lube in the die. Tried again tonight and ended up hand lubing them.Quote:
Originally Posted by 260rem
there should be no lube or very little in the sizing chamber in the die until you push the projectile down
What make of lube are you using
Thanks for helping "dickhead me" wasn't using it correctly! Watch utube and walla the lights went on yahoo!