Thread: Mag Feed T3 7RM Loads

I single feed the 162 ELD-X to get them shooting in my T3 rem mag. Keen to see what loads others use that shoot well at mag length with that jump?

I never tried anything but the ELD-X so wondering if maybe something like the TMK might be less susceptible and go better at mag length. Just gathering info to decide whether I should bother pursuing it or not.

Cheers.

162 eldx work well for me at mag length in a T3. 2217 and 2225 didnt quite have the accuracy I was after but 69.5 grains of 2213sc is going real well. MV = 3009 fps

I struggled to get the eldx too shoot at mag length, so switched to Tmk and have yet too shoot a group over a inch with the Tmk, very easy bullet to get to shoot

I'm using 2225 and getting 2970 with oal of 85mn

70.5 gr 0f 2217 at mag length Tikka SuperVarmint with a 162 AMAX. Gives me 1/2 to 1/4 MOA when I do my bit. The load did not mind the considerable jump.
Have not tried the eld-x. Have heard that 162 eld-m is essentially the old AMAX, if I am correct you could try the eld-m. The AMAX has never let me down always cleanly killing.