Can someone give me the distance from bore to unit for best results. The one I have borrowed has no instructions but has a lot of shims and I don’t want to f@&k it.
@gadgetman I think you have used one before.
Printable View
Can someone give me the distance from bore to unit for best results. The one I have borrowed has no instructions but has a lot of shims and I don’t want to f@&k it.
@gadgetman I think you have used one before.
Forgot to add that it is going under a DPT suppressor, couldn’t edit.
Theres a square rod spacer in the lid about 7mm below the bottom of the bore.
Instructions are available online
As Brian said. Lay the square rod on top of the pick up sensor and the top of the rod should level with the bottom of the hole in the DPT. Use spacers to adjust until correct.
Sent from my SM-A530F using Tapatalk
This is the link to the Instruction manual if it helps
https://media.mwstatic.com/productdo...structions.pdf
Use a lab radar!
PM if you want to borrow mine.
Jeez, you're game. Rather lend my wife first [emoji16]Quote:
Originally Posted by 300_BLK
Sent from my SM-G965F using Tapatalk
Cheers fullas.
Just had a look and I haven’t got the square spacer rod. Should be able to work it out from here though.Quote:
Originally Posted by spada
I put a non ferrous rod in the barrel. Gives a better indication with tapered barrels of how straight and the distance.
the square spacer rod is in the top foam part near the hinges
You lost me there. Here is a picture of what there is.Quote:
Originally Posted by carlhurley
Attachment 103552
There isn't one with the gear from Philipo.Quote:
Originally Posted by Shootm
Sweet don’t feel like an idiot now, buggered if I could find it.Quote:
Originally Posted by gadgetman
