Thread: Magnetospeed sporter on a suppressor

Ha no iron content in the projectiles... Which means I don't understand how the magnetospeed works

I got my 10x2.5mm at https://amfmagnets.co.nz/ in Aus

The manual says you need a 1/8" to 3/8" gap. 3 of those stacked gave me about 7/16" gap with my 41mm suppressor but it still worked with a change in sensitivity.
Because I've shattered one into three pieces I've ordered some 3mm, 5mm and 10mm to have a play with and close the gap up if I need to with the high speed loads. They are from a NZ company https://www.magneticsolutions.co.nz/...nets-20/page/3