Thread: Moly for barrel?

Sweets ammonia in a stainless barrel?

Originally Posted by Tikka7mm08

Sweets ammonia in a stainless barrel?

No problem Sweets shifts copper better than most more expensive solutions, just don't leave it in the barrel for very long,
Use a Nylon bristle brrush Sweets eats Bronze brushes and gives a false blue trace, A good scrubbing with JB compound or Auto Sol
will help smooth the barrel out, my Sako 6.5x55 took a while to settle down
The problem with Moly bore paste it can trap moisture under the coating and cause corrosion

Originally Posted by shooternz

No problem Sweets shifts copper better than most more expensive solutions, just don't leave it in the barrel for very long,
Use a Nylon bristle brrush Sweets eats Bronze brushes and gives a false blue trace, A good scrubbing with JB compound or Auto Sol
will help smooth the barrel out, my Sako 6.5x55 took a while to settle down
The problem with Moly bore paste it can trap moisture under the coating and cause corrosion

Great advise here ^^^
Auto Sol is a better choice than JB in my opinion. Just don't come out past the muzzle end if using a cloth wrapped around a smaller brush, rumours are that it could wear the crown a little.