Can I use a 7wsm neck die to neck size 7SAUM?
I think it will be fine based on the WSM having a fatter body.
Been looking for a 7SAUM neck die but no luck.
Cheers,
F
Printable View
Can I use a 7wsm neck die to neck size 7SAUM?
I think it will be fine based on the WSM having a fatter body.
Been looking for a 7SAUM neck die but no luck.
Cheers,
F
You might not quite reach the entire neck as the shoulder/junction of the wsm is at a higher level than the one of the saum
Order one from Sinclair’s in US. Even with lower cost post shipping options it only takes a week or so
Are they based on the same parent case ?And is it a bushing style die, if so then yes, I use a neck bushing die from 308 to do 260. It would equally do 7mm 08 or 243
Both based on the same case, wsm has a shorter neck and shoulder junction is higher.
Figured the longer neck of the saum would enable the neck to be sized up to the shoulder jusnvtion with no problems.
Not a bushing die just regular neck sizer
You just bought a smaller bushing what about a fl Redding type s 308 die with a 260 bushing