Thread: Neck sizing .338 brass

Can I use any 338 neck sizing die to size my 338 norma mag or do I have to buy a specific 338 norm one (e.g a 338 lap neck die will work the same?) having trouble tracking one down

LM die prob won't work as that case is longer than the NM, will depend on how far into the die the case has to go to begin neck sizing. A hornady neck die may work, but it would pay to check if the case body would fit into the die

Sent from my HTC One X using Tapatalk 2

I was having problems finding a .338 neck sizing die so I got a hornady die for a similar bodied case and got Scott trail to turn it into a .338 neck sizing one for me.

Just run the FL die off the shoulder

Just do a "minimum" full length size every time

Neck sizing only is one of these "smart things to do" which really isnt

Yea cheers for all the solutions guys, never thought of using the fl die! Haha. Why do you say it isn't smart cyclist?

2 reasons

You end up with a heap of brass which is either neck sized or not and anywhere in between and so end up with higher ES = vertical spread
You end up taking cases hunting which require a crush fit to chamber and then you find one which WONT chamber as a grade A+ wallhanger Tahr saunters away

The usual reasons given about not working brass etc are a total irrelavence in any standard chambering and any potential gain in accuracy is lost in the million reasons why the rifles we own are not shooting low 0's

my $0.02 anyway - no doubt there will be people who have drunk the coolaid

+1

Originally Posted by Cyclist

2 reasons

You end up with a heap of brass which is either neck sized or not and anywhere in between and so end up with higher ES = vertical spread
You end up taking cases hunting which require a crush fit to chamber and then you find one which WONT chamber as a grade A+ wallhanger Tahr saunters away

The usual reasons given about not working brass etc are a total irrelavence in any standard chambering and any potential gain in accuracy is lost in the million reasons why the rifles we own are not shooting low 0's

my $0.02 anyway - no doubt there will be people who have drunk the coolaid

wow awesome. so its drinking coolaid to search for increased performance? yea man each to their own though i guess, seems like your reasons for not neck sizing are related to you not keeping track of brass and your sizing technique rather than neck sizing being a flawed method of potential accuracy increase

Originally Posted by ARdave

wow awesome. so its drinking coolaid to search for increased performance? yea man each to their own though i guess, seems like your reasons for not neck sizing are related to you not keeping track of brass and your sizing technique rather than neck sizing being a flawed method of potential accuracy increase

The moral of the story is if you can keep track of your brass you haven't got any where near enough!

nah...at $2.80 a pop id rather not buy hundreds if there's no need to. the moral of the story really was neck sizing 338 brass, not should i neck size 338 brass

Originally Posted by ARdave

nah...at $2.80 a pop id rather not buy hundreds if there's no need to. the moral of the story really was neck sizing 338 brass, not should i neck size 338 brass

If you want to..
As above use FL held high
Or buy a cheapie lee die, bore the guts out and chop the base off

haha fuck...alright wankers yous win ill give your tips a 'shot' , teach a young dog new tricks

Better brass life too isnt it or is that a myth?

Depends if your superglueing in the primers after the first firing

Sent from my GT-S5360T using Tapatalk 2