Thread: Neck turning

Originally Posted by Tuckerbox

Cheers for the reply’s guys. I have an AMP annealer so I’ve got that part covered. I was more curious about neck turning due to wildcat case forming and necking down. Thinking 6-6.5x47 lapua and 7-300WSM

Yes it’s handy for that, when I first got my 260 I didn’t have any brass for it so I resized some 308 brass down, then gave it a light neck turn and more importantly gave it a small cut into the shoulder to stop donuts forming later on.

Recently I neck turned some federal 270 brass I was given as it was quite a bit thicker than the Nosler I’m using and as I use a bushing die I wanted it the same thickness.