Thread: necking up 243 to 7mm08

Originally Posted by No.3

Probably excessive headspace in action due to the steeper shoulder. Necking it straight to the required size isn't placing the shoulder in the right spot for correct headspacing so the head of the case isn't supported. That's why the step up to .308 or 7.62 is important, as when it's necked back down to 7mm it leaves a 'false neck' or a donut ring in the right place for headspacing. With that much shaking the neck size all about, annealing would be important I'd think. Especially on the first firing when the shoulder blows out to the chamber size.

Otherwise, it would be easier taking .308 cases straight to 7mm but it is safer to neck brass up as the wider pill dimension usually prevents chambering. I've had one .308 that swallowed a 7mm08 - wasn't very successful and the grouping sucked but I'm lead to believe that you shouldn't actually be able to do that?

yea man all that would help, I just like mentioning it often incase someone reads it before falling in the same trap
I discarded all my 30-06/270 and went with 280rem hornady brass. I was just being a tight wad and it came back to bite me

I hadnt seen a whisper about it before it happened so it really caught me off guard