If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
Ive struck a very similar issue where fired brass was very hard to extract from chamber, bolt had to be taped rearward to pull out brass from chamber.
The issue was the new barrel had been chambered with a match reamer, which was slightly tighter in the webbing/ case head area. I used brass that had been fired in the old barrel, it chambered fine but super hard to extract after firing in the new chamber.
The smith told me to use brand new brass, and sure enough when i did the problem was fixed.
The area of the case back by the case head that doesn't get sized by the FL die was the issue.
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks