Thread: New Nosler Subsonic projectile.

Exciting stuff here!

https://www.nosler.com/blog/news-and...sonic-offering

Sent from my SM-A320Y using Tapatalk

Fuck Yeah, if they can offer them for a reasonable price ill be all over them. 3 bucks a pop for the Lehigh is a bit steep

I'll be very keen to try these

What powder would you put behind this in a 20" .308?

Accuracy all over the show with baking powder

Id be starting with trailboss.

Originally Posted by veitnamcam

Id be starting with trailboss.

Very good article in NZ Guns using Trailboss for the 222 and similarly the 223.Very informative and helpful. You get a bit sick of the constant drivel in some of the mags.

Originally Posted by TeRei

Very good article in NZ Guns using Trailboss for the 222 and similarly the 223.Very informative and helpful. You get a bit sick of the constant drivel in some of the mags.

Stop reading mags.
You only get one usually very biased opinion.

Sent from my SM-A320Y using Tapatalk

@shooternz, you might run out of work ;-)

They should make one no more than 165 gr. That is enough through an animal and will stabilise in a normal 308 factory twist barrel.

[QUOTE=Friwi;642917]@shooternz, you might run out of work ;-)

Only if they can sell them for less than .30 cent each, Have you ever known Nosler to sell cheap bullets my guess is they will be $2.50 or more.

Think I will go for a a price rise to make up for lost sales

[QUOTE=shooternz;643010]

Originally Posted by Friwi

@shooternz, you might run out of work ;-)

Only if they can sell them for less than .30 cent each, Have you ever known Nosler to sell cheap bullets my guess is they will be $2.50 or more.

Think I will go for a a price rise to make up for lost sales

do you make projectiles in 8mm, in the process with my 8x57, just test fired my prototype suppressor with full charge loads today, would love to get this down to a whisper.

I do have a 8mm mould but I doubt that it will work at subsonic velocity it is a 230 grain Spitzer way too long to stabilise at 1000fps you need a short round nose
I can make some up if you want to try them.
Cheers
Robert.

Originally Posted by shooternz

I do have a 8mm mould but I doubt that it will work at subsonic velocity it is a 230 grain Spitzer way too long to stabilise at 1000fps you need a short round nose
I can make some up if you want to try them.
Cheers
Robert.

Hi Robert Keen as Mate I can pop over the hill and pick up when there done.

i have them on order, no eta but they will be $60 for a box of 50
Greg

Originally Posted by greghud

i have them on order, no eta but they will be $60 for a box of 50
Greg

put me down for two boxs please