If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
thanks Makros...thought I WAS LOOSING THE PLOT....
right so have finally found hard data...sort of... paper loading manual
I have 24.5 grns lilgun with a 240 grn projecttile AND 17.7 grns lilgun with a 300 grn projectile
also found in handloader magazine online and confirmed by MD Smith data online 19-21grns with a 270grn projectile
so out came pencil,paper and Japanese brain (calculator)
if I drop charge weight a little bit to begin and end......
I BELIEVE that should put me in safe loading range because Ive dropped down from maximum to begin with...the middle 270grn on my madeup chart sits alongside what I can find so sort of confirms it....
looks like the AS30N and AS50N arent any use to me unless I find lighter projectiles they are red n green dot comparable.... and trailboss,well it looks to only give low velocity loads anyway.....
open to verification or DONT DO IT,you way outside of safe if thats what your numbers tell you.
Your AS50n is what I would use for 44Mag 7.6 gr +300 grain projectile =1030 fps and dead Fallow. ES with AS50 is only 6 fps Trailboss will be 30 - 60 and some will go trans-sonic ime
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks