Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Ammo Direct Terminator


User Tag List

+ Reply to Thread
Page 1 of 3 123 LastLast
Results 1 to 15 of 32
Like Tree46Likes

Thread: Pet loads for the 7x57

  1. #1
    Full of shit Ryan_Songhurst's Avatar
    Join Date
    Sep 2015
    Location
    South Island
    Posts
    10,305

    Pet loads for the 7x57

    What say you all? Looking around the internet there seems to be two different data sets for each projectile weight, one being very anemic and one with a bit more spice. I'm guessing there's a lot of data out there that's been developed for old military actions etc much like the 6.5x55?
    Rifle is a BSA viscount. Would it be safe to assume it will handle "modern" pressures?
    dannyb and grandpamac like this.
    270 is a harmonic divisor number[1]
    270 is the fourth number that is divisible by its average integer divisor[2]
    270 is a practical number, by the second definition
    The sum of the coprime counts for the first 29 integers is 270
    270 is a sparsely totient number, the largest integer with 72 as its totient
    Given 6 elements, there are 270 square permutations[3]
    10! has 270 divisors
    270 is the smallest positive integer that has divisors ending by digits 1, 2, …, 9.

  2. #2
    Member
    Join Date
    Jun 2013
    Location
    BOP
    Posts
    997
    Seem to recall I ran 49gn 2209 behind a 140gn prohunter in my viscount... can't lay my hands on my 7x57 data so don't quote me! I do recall it hated all BT projectiles, FB shot well.
    Ryan_Songhurst likes this.

  3. #3
    Member
    Join Date
    Jun 2013
    Location
    BOP
    Posts
    997
    @Ryan_Songhurst if it's in good condition you can pretty well use 7mm08 data

  4. #4
    Member Mathias's Avatar
    Join Date
    Oct 2015
    Location
    Canterbury, home of the big Rakaia Red Stag
    Posts
    4,492
    Win760 is the go to powder

  5. #5
    Member
    Join Date
    Dec 2011
    Location
    Perth
    Posts
    1,963
    51 of 2213sc behind 150 Sierra.
    Ryan_Songhurst likes this.
    I'm trying to get to heaven before they shut the door.

  6. #6
    Member
    Join Date
    Jan 2020
    Location
    South Canterbury
    Posts
    375
    I run 45.5 gn AR2209 behind 140 gn Rem corelokt, out of Rem cases.
    Ryan_Songhurst likes this.

  7. #7
    Member
    Join Date
    Oct 2014
    Location
    Napier
    Posts
    1,146
    Hi Ryan, I only now use the 130gn Speer and 48 gn of 2209.
    Moa Hunter and Ryan_Songhurst like this.

  8. #8
    Member
    Join Date
    Jul 2013
    Location
    Godzone, South Island
    Posts
    1,705
    42gn's 2206H with 140 SGK for 2714fps, or 47gn's 2209 with 150 Corelokt. BSA Viscount.
    Ryan_Songhurst likes this.

  9. #9
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,671
    bush load=big fat flat or round nose load toddling along.....suit yourself for out in open. youve used .270 for years,its not a HUGE amount different,little slower but with vastly more projectile options,assuming you can find some.
    75/15/10 black powder matters

  10. #10
    Member
    Join Date
    Jan 2021
    Location
    Kerikeri
    Posts
    332
    @Ryan_Songhurst. I owned and loaded for a Hunter, similar if not same as Viscount. Longtime ago now. No problems that I recall. Don't have any data noted but from memory was always close to max from reloading manuals published in the 70's nd 80's. My current loads have been developed for Ruger M77 Mk1 with a Shilen barrel. Usual disclaimers apply.
    140 Accubond 47.7 N204 2700 fps, 140 Nos BT 48.9 760 2830 fps. Rem 150 coreloct 48 2209 2700 fps. All happily under minute of angle, although the Rem's can be a bit of a bitch in regard to projectile consistency. I've found the most consistent powder to be W760. Am currently working up a load with H414, some say it's same as W760 but that's above my paygrade. I've pushed the envelope a bit with the 140 Nos Bt, simply trying to get as much velocity as I safely can and still under MOA. The aim to get the projectile to perform at longer range. I use F210's with all powders but have also used Winchester with no noticable difference. 7 x 57's an awesome cartridge.
    Micky Duck likes this.

  11. #11
    Member Mathias's Avatar
    Join Date
    Oct 2015
    Location
    Canterbury, home of the big Rakaia Red Stag
    Posts
    4,492
    Quote Originally Posted by Mathias View Post
    Win760 is the go to powder
    Found my info. 49gr with 140 BT gave great accuracy and around 2900fps in a Viscount belonging to a mate. I've yet to load for mine & check it's liking.

    Sent from my SM-S906E using Tapatalk
    Micky Duck likes this.

  12. #12
    Member
    Join Date
    Aug 2021
    Location
    Malborough / Blenheim
    Posts
    17
    52 grains of 760 W behind a 139 hornady interlock flat base in my discount really gets it humming, very accurate load. Like someone else said flat base bullets only it seems work in those BSA otherwise they throw them all over the place.

  13. #13
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    3,049
    Quote Originally Posted by Ryan_Songhurst View Post
    What say you all? Looking around the internet there seems to be two different data sets for each projectile weight, one being very anemic and one with a bit more spice. I'm guessing there's a lot of data out there that's been developed for old military actions etc much like the 6.5x55?
    Rifle is a BSA viscount. Would it be safe to assume it will handle "modern" pressures?
    Greetings,
    The Viscount will definitely handle modern pressures. When sorting out loads for the 6.5x55 I used .260 Rem and 6.5 Creedmoor data to establish maximum velocities and then adjusted for the extra case capacity. You could probably skip the last step. Next I worked up to that velocity which will probably take a little more powder than the 7mm-08. Ken Waters stated that he could not achieve 7mm-08 velocities in his 7x57 rifles without excessive expansion which I think was due to the latter cases being softer. Feel free to PM me if you want some worked examples.
    Regards Grandpamac.

  14. #14
    Member
    Join Date
    Apr 2017
    Location
    The 'Naki
    Posts
    2,473
    I have an older Interarms Mark X, barrel shortened to 21in and DPT Suppressor. Two successful hunting loads.. first is Remington 150gn Cor-Lokt, SP FB, with 49.5gn RL19. Average 2650fps. Second, Speer 130gn Spitzer SPFB, 52.0gn RL19, 2750fps. I also made a load up for an old Govt Culler for his BSA Hunter that has many miles on the clock. He wanted to emulate his factory ammo. He was printing clover leaves at 65m with 139gn Hornady Interlocks over 37.0gn 22065. Not chronoed. Said after a few groups he had never got as good with factory ammo.
    I know a lot but it seems less every day...

    Due to the exorbitant cost of reloading components, warning shots will not be given.

  15. #15
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    12,743
    Graham Henry wrote an article years ago (40) about the 7x57 - I think using a Hunter.
    Anyway I distinctly remember him getting 2,800 fps with a 139 grn bullet using W760.

    I have an old Nick Harvey hand loading manual here and he quotes a max charge of 50 grains of W760 for 2,900 fps from a Brno ZK. Sounds pretty warm to me, as a lot of Harvey's loads seem to be.
    Treat as a guideline and not a rule.
    shananah likes this.
    Out beyond ideas of wrongdoing, and right-doing, there is a field. I will meet you there.
    - Rumi

 

 

Similar Threads

  1. 7x57 loads
    By Frogfeatures in forum Reloading and Ballistics
    Replies: 2
    Last Post: 04-07-2022, 02:10 PM
  2. 7x57 loads
    By PerazziSC3 in forum Reloading and Ballistics
    Replies: 3
    Last Post: 13-09-2019, 07:31 PM
  3. 7x57 loads
    By northdude in forum Reloading and Ballistics
    Replies: 19
    Last Post: 07-09-2019, 07:57 PM
  4. 7x57
    By Blaser in forum Reloading and Ballistics
    Replies: 1
    Last Post: 15-07-2015, 08:21 PM
  5. 7x57 loads
    By Nathan F in forum Reloading and Ballistics
    Replies: 10
    Last Post: 27-10-2013, 10:27 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!