PLEASE, learn with my mistake! (or just remember it)

So, i put my stuff to load few more 223 rounds on the bench/desk, I got a container of ADI2208 that i reload my 65 and 69gr projectiles, but then i decide to load my 60gr projectiles and here start my mistake.
I then put all my 60gr gear back on and got my ADI BM2 container up the bench as well, i did reload 50 rounds and when cleaning my powder dispenser i got the "first" container in front me and drop the powder in… BOOM! mistake done!
I put all the more or less 60gm of powder in the wrong container, all my (200gm) of 2208 was mix up, no more use for both of them.

Lesson learned, never put more than what you need to load in your bench, make sure you have ONLY what you need for the occasion, does not matter what you about to do double check and put all the things that are not related or necessary for the process AWAY.

Thank you for your attention, i hope it remind all of us about the "risks" reload has.

Cheers.

Mac

You are not unique mate - I have done exactly that and I bet a few others have as well. Good of you to post your warning to others. I knew immediately I had done it faaark.Now I only ever have one powder type on the bench at a time. If I am loading several different types during the session I pedantically leave the other powders in the next room until individually needed. Too easy to make a mistake and charge with wrong powder as well. You only need to get interrupted (mate rings wanting to natter, meal break etc etc) and the ingredients are there for a big woops.

no problem , you have just made your first "wildcard" powder mix .... exciting times ,.

I put powder in the rsbs auto dispenser without closing the bung.

Quote:

---

Originally Posted by bully

I put powder in the rsbs auto dispenser without closing the bung.

---

Bloody snap! I have marked the top closed position on my Chargemaster with liquid paper and still occasionally do that. Man, powder is like blood, a bit spreads out over a big area. One day my reloading room is going to explode, with me in it, due to all the spilt powder around.

I put my hand up too, after loading super sonic and sub sonic 338 Fed loads i cleaned up my mess and tipped the leftover adi2205 into the almost new adi2219 bottle. Being tight i cut the bottle just below from the powder level which removed most of it and then spooned the top off. I thought the small percentage i could of missed would be fine after a good mixing. (wrong ) I did a few test loads with the new blended powder and ran them over the chrony. Some would read standard speeds but others would smoke out 300fps faster !
Lesson learnt i biffed $80 of powder away.

Save all that stuff for Nov 5 makes great roman candles:thumbsup:

One reason I stayed with only having ADI2208 for a long time, you cant make a mistake with just one powder. Sadly the 224 needs a denser powder so the other thing I do is have a thrower only for BM2 and I'll probably get another for 2208 at some point I use scoops for now, lee throwers are not exactly expensive.

I don't reload so have never done this. In fact I haven't got a clue what you are talking about.

I want to see how high you can launch a anvil with said powder.

Lol! @Rushy, dont worry this way you are safe.
To every body else who did reply to this thread, thank you, in different ways you guys made me feel better or less "embarrassed", I was sure someone has done it before me but remind about the fact that it can happen with anyone who reload and that is a VERY SERIOUS situation.
Cheers

Mac

Quote:

---

Originally Posted by veitnamcam

I want to see how high you can launch a anvil with said powder.

---

How can I try? Any suggestion in how to do(prepare) it?

Here is one way.

https://www.youtube.com/watch?v=IhQ4dE_RGnQ

You dont need two anvils tho just a very sturdy "chamber" you can fill with powder.

https://www.youtube.com/watch?v=KeNP4i47oeU

That looks like alot of fun, but expensive on powder.

Now to find some anvils........

Quote:

---

Originally Posted by veitnamcam

Here is one way.

https://www.youtube.com/watch?v=IhQ4dE_RGnQ

You dont need two anvils tho just a very sturdy "chamber" you can fill with powder.

https://www.youtube.com/watch?v=KeNP4i47oeU

---

Have to put my hand up too,loaded 45/70 rounds after working nightshift and used ar2205 for hornet that was on bench instead of ar2207.Lucky noticed mistake when returning unused powder to container.
Lesson learnt

I spent a while trying to seat 7mm LRABs into a 270 case

Sent from my SM-N910U using Tapatalk

Quote:

---

Originally Posted by steven

One reason I stayed with only having ADI2208 for a long time, you cant make a mistake with just one powder. Sadly the 224 needs a denser powder so the other thing I do is have a thrower only for BM2 and I'll probably get another for 2208 at some point I use scoops for now, lee throwers are not exactly expensive.

---

Whats a .224, is that a Weatherby Magnum?

Just the diameter of the projectile, many people who reload from time to time call the "223's" "224", unless i am wrong once again. LOL.

Quote:

---

Originally Posted by Remington 5R .300 Win Mag

Whats a .224, is that a Weatherby Magnum?

---

Quote:

---

Originally Posted by bully

I put powder in the rsbs auto dispenser without closing the bung.

---

Always check the bunghole first. It's not like marrage where you have to work your way up (down??) to the bunghole.

Quote:

---

Originally Posted by PERRISCICABA

Just the diameter of the projectile, many people who reload from time to time call the "223's" "224", unless i am wrong once again. LOL.

---

Yeah, gotcha. Should've known that, I reload myself... and for that calibre (.22-250)
Thanks!

Quote:

---

Originally Posted by Rushy

I don't reload so have never done this. In fact I haven't got a clue what you are talking about.

---

you just get Andrewh to load for you lol

Quote:

---

Originally Posted by Rich007

I sp5ent a while trying to seat 7mm LRABs into a 270 case

Sent from my SM-N910U using Tapatalk

---

8mms in 7.62 cases they were boat tails so they went in. Thought the press was a bit hard to work! Good workout for the inertia puller.

When I was using a powder thrower , I put a strip of masking tape on the hopper and wrote the powder in it , you can also keep the hopper empty when not in use as well .
Easy mistakes , you just need a system that is easy and you stick to , we have all wasted a bit of powder , in the Opps whats the powder in there ?