Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Night Vision NZ Terminator


User Tag List

+ Reply to Thread
Results 1 to 13 of 13
Like Tree16Likes
  • 1 Post By Mathias
  • 1 Post By wsm junkie
  • 2 Post By Ryan_Songhurst
  • 3 Post By R93
  • 5 Post By R93
  • 2 Post By Mathias
  • 2 Post By R93

Thread: Powder for 123 Amax in .260

  1. #1
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102

    Powder for 123 Amax in .260

    What powder do all you .260 guys use with the 123 Amax?

    nzfubz sent me some to sample and I finally got around to testing them.

    I used 2209 and while scary accurate I could not get them much above 2950fps without reaching pressure, that I am comfortable with.
    I use the same load with 129/130 class bullets and have them going as fast but with no pressure and a long case life.

    Happy to stay at 2950 as I have yet to shoot a group over .3 with the 123 so far. Very happy with that for sure, but would have thought over 3000fps with the Ackley would be expected.
    Faster powder maybe, but I thought I would pick some brains before I try to anything else to save some time.

    Cheers.
    Do what ya want! Ya will anyway.

  2. #2
    Shut up and Shoot
    Join Date
    Jul 2012
    Location
    Upper Hutt
    Posts
    124
    2209 or VV N550 or W760. If its a 24 inch barrel 2950 is getting near max vel anyway. Weight is not the only factor bullet bearing surface, hardness diameter also influence things. Somme 155 308 match bullets have such a small bearing surface you can push them another 50-70 fps over 150 gn sporting bullets.

  3. #3
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Quote Originally Posted by Herbmiester View Post
    2209 or VV N550 or W760. If its a 24 inch barrel 2950 is getting near max vel anyway.
    My barrel is 24" I am using 2209 now but have some other powders including N550.

    It is an Ackley and I get 2950 with heavier bullets and great case life. So I would think no where near max with a 123, although with 2209 it indicates I am at near max @2950.

    I am sure velocities are accurate as I have a V3 magnetospeed.
    Do what ya want! Ya will anyway.

  4. #4
    Member Mathias's Avatar
    Join Date
    Oct 2015
    Location
    Canterbury, home of the big Rakaia Red Stag
    Posts
    4,513
    I was getting 3097fps from 45.5gr RL17 from my 30deg Improved with the 123gr Amax. Maybe some 2208 could be worth a try? Or as mentioned WW760.
    R93 likes this.

  5. #5
    GWH
    GWH is offline
    Member
    Join Date
    Jul 2012
    Location
    Napier, Hawkes Bay
    Posts
    4,460
    I was running the 123am at near 3k from a 20" barrel with H414 (W760) straight 260 rem

  6. #6
    Member wsm junkie's Avatar
    Join Date
    Dec 2011
    Location
    Northern Rangitikei
    Posts
    1,491
    H414/W760 changed my 7mm08AI into a different beast, getting easy 200fps over my 2209 loads.
    GWH likes this.

  7. #7
    Member outdoorlad's Avatar
    Join Date
    Dec 2011
    Location
    Christchurch
    Posts
    3,010
    I use Re17 to drive them in my 6.5x47. If you can find any.
    Shut up, get out & start pushing!

  8. #8
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Quote Originally Posted by outdoorlad View Post
    I use Re17 to drive them in my 6.5x47. If you can find any.
    Been there done that. I liked the powder but its lack of availability put me off it. I will try some 760 and see how I go. Otherwise will just settle on the 2209 load.
    Do what ya want! Ya will anyway.

  9. #9
    Full of shit Ryan_Songhurst's Avatar
    Join Date
    Sep 2015
    Location
    South Island
    Posts
    10,312
    rough rule of thumb when loading for the 260, projectiles under 130gr use 2208, 130 and heavier use 2209, seems to work well.
    johnd and Gibo like this.

  10. #10
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Thanks to those that suggested W760.

    Got a nice accurate 123 Amax load worked.
    3040fps. Nice tiny little groups.
    No pressure signs and using less powder than I did with 2209.

    Will try it with heavier bullets when I get a chance.


    Sent from my SM-G935F using Tapatalk
    wsm junkie, GWH and Mathias like this.
    Do what ya want! Ya will anyway.

  11. #11
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Wind died down a bit an hour before dark so I shot up to the club to test a load and finalise another.
    Using W760. Goes good😆

    Shot the one on the right first. 129 gr interlocks. 2950fps 11fps ES over 5 rnds.

    Made sure I adjusted my position to shoot the group on the left but I still managed to pull my first shot.
    Had something a smidge wrong with my setup as the MPI with the Amax is 1/2" higher.

    Earlier today it was identical to my other loads when shooting at the same mark.

    Was running out of light and didn't like my last shot either but still went well under an inch for 5 rnds if I ignore the first.😆

    123 Amax 3040fps 12 fps ES
    I reckon I could probably stay under any pressure with another grain of powder but do not see the point.


    Sent from my SM-G935F using Tapatalk
    Blaser, wsm junkie, GWH and 2 others like this.
    Do what ya want! Ya will anyway.

  12. #12
    Member Mathias's Avatar
    Join Date
    Oct 2015
    Location
    Canterbury, home of the big Rakaia Red Stag
    Posts
    4,513
    Quote Originally Posted by R93 View Post
    Wind died down a bit an hour before dark so I shot up to the club to test a load and finalise another.
    Using W760. Goes good��

    Shot the one on the right first. 129 gr interlocks. 2950fps 11fps ES over 5 rnds.

    Made sure I adjusted my position to shoot the group on the left but I still managed to pull my first shot.
    Had something a smidge wrong with my setup as the MPI with the Amax is 1/2" higher.

    Earlier today it was identical to my other loads when shooting at the same mark.

    Was running out of light and didn't like my last shot either but still went well under an inch for 5 rnds if I ignore the first.��

    123 Amax 3040fps 12 fps ES
    I reckon I could probably stay under any pressure with another grain of powder but do not see the point.


    Sent from my SM-G935F using Tapatalk
    Faaark look at that aye....boring as bat shit old Interlocks shootn shit hot like they do and most of us ignore them coz their BC is like a brick and there's no wizzy pointy plastic tip and boat tail thingy to look cool as
    SlimySquirrel and Danny like this.

  13. #13
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Quote Originally Posted by Mathias View Post
    Faaark look at that aye....boring as bat shit old Interlocks shootn shit hot like they do and most of us ignore them coz their BC is like a brick and there's no wizzy pointy plastic tip and boat tail thingy to look cool as
    I friggen love them.😆

    Have used them since I had a 6.5-06. They went as good in that as well.

    They kill as well as any other bullet I have used and I have shot them on paper and steel out to 600 with great results.
    Best, cheap .264 bullet out there imho.


    Sent from my SM-G935F using Tapatalk
    Tahr and Mathias like this.
    Do what ya want! Ya will anyway.

 

 

Similar Threads

  1. 7mm 162 amax for 168 vld?
    By Gibo in forum Projectile and Factory Ammo Exchange
    Replies: 12
    Last Post: 02-06-2015, 09:53 PM
  2. 162 amax
    By longrange308 in forum Reloading and Ballistics
    Replies: 15
    Last Post: 30-04-2015, 08:44 AM
  3. 7mm08 / 162 Amax powder options
    By ebf in forum Reloading and Ballistics
    Replies: 6
    Last Post: 15-03-2015, 10:39 PM
  4. Swap 30cal 168gr Amax for 178gr Amax
    By LJP in forum Projectile and Factory Ammo Exchange
    Replies: 0
    Last Post: 31-07-2013, 10:31 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!