Thread: Powder Scale Options

Originally Posted by Gerardo

Put plaster of paris in the bottom. Adds weight and stability to the beam scales.
And use a check weight every 5 or so loads.
My 2c.

Sent from my SM-G975F using Tapatalk

I have a Redding beam. I glued some lead sheet on the underside for same reason.

For better/faster dampening just replace the magnets with stronger ones. It won't effect accuracy.

If the beam is not consistant sharpen the knife with a very, very fine stone and brush graphite in the V.

I always use a check weight when I set up. Almost anything will do. As long as it's retained, kept clean and weight noted. e.g a 55gr bullet.