Thread: Powder trickler advice

Originally Posted by 6x47

When you're past 600yds on F class targets, you want everything you can get going for you. As you say, for 95% of shooters, the last 0.1 doesn't matter.

If you think about it, your method is probably more time consuming than mine even if you only checked every tenth one. Even you checked every one, it won't be as accurate as mine.

Sorry i explained it wrong as i know my weights from the dispenser are right i dont cross check them at all except the first after a quick calbrate.
Probably spitting out 50 rounds in half an hour as i seat the projectile while its weighing out another load.
As far as accuracy goes i shot my 338 and 6.5 last week at 600 on paper and both were holding 1/2 moa or slightly better.
The 338 grouped 3 inches at 830 a couple of weeks ago and i cant shoot any better than that so i will continue with the .1 tolerance me auto load gives me.
Alot of that fidling round is good for putting your mind at rest but along with my concentricity guage the chrony can sit as well as they are only guides.