Thread: Problematic 6mm Remington

too many moving parts without having a look

I have had this with too long action screws bottoming out but not squeezing the stock, just had to shorten the screws

you wouldnt believe how many "yeah this is a great scope Iv never had a problem with it" scopes turn out to be the problem, something just comes loose inside. this is what I think is the issue personally

loose rings or rings set up incorrectly is very common

rocking in the stock usually doesn't cause this bad a group

try an 80gr flat based soft point, 6mm rem is old school and probably has a slow twist to use varmit weight bullets if its 10 twist or slower 100gr get very on the edge of stability, surprising theres no keyholes

its basically just an obscure 243w so maybe 2209/2208 would be a better fit?