Thread: Progressive press upgrade

Case lubing I just spray cases with either Dillon or Hornady case lube and give a shake around in container. Some calibres if you have trouble can give each a more specific spray around shoulder but rarely need to.

Fast to deprime as you just feed in one side and keep advancing and they pop out into your blue tray. I've been hand priming with RCBS but going to set 550 up shortly to do again.

I have just been dropping powder with RCBS auto dispenser and loading from tray with projectiles like a single stage.

Have multiple calibres set up on different tool heads so just grab the one I need and away you go. She'll plate for 308, 6.5, 22.250, 270 is always same so you don't need to change that unless doing say 223, or magnum the other way.