Thread: RCBS Dies... Problem?

Originally Posted by R93

Have you got the button fitted?

If so remove it and size a couple and see if it is still stiff.

Only resistance you should have on the upstroke is the button.

Sent from my SM-G935F using Tapatalk

Took the button and shaft out of the die and its still really hard to push it up that last few mm

Originally Posted by Ryan_Songhurst

Took the button and shaft out of the die and its still really hard to push it up that last few mm

That's odd then mate. Even if it is over sizing the spring of the brass shouldn't allow it to bind (at the neck?) without the stem and button.

Go with your original plan and have a measure up.

Have you seated a primer to see if the pocket is still tight? Might indicate a problem if loose.




Sent from my SM-G935F using Tapatalk

Will try pick up a caliper tomorrow and see what I come up with, had a quick look for my other one this evening but I'm buggered if I know where I have put it, have stopped sizing for now as I don't want to wreck all my brass if its playing silly buggers. @matagouri I will give you a text, might have to take you up on using your sizer until I get it sorted