Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Night Vision NZ


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 21
Like Tree11Likes

Thread: RCBS or Lee

  1. #1
    Member
    Join Date
    Mar 2017
    Location
    Marlborough
    Posts
    1,475

    RCBS or Lee

    Have been slowly purchasing equipment to get into reloading. Want to buy a press, want to keep price under $200. Have found RCBS Partner press and Lee Breech Lock Challenger press for under this price.
    Question is which one will be better and why. Not interested in 'it's shit', those sorts of comments seem to be common on here but are largely unhelpful.
    Cheers

  2. #2
    Unapologetic gun slut dannyb's Avatar
    Join Date
    May 2018
    Location
    Oxford, North Canterbury
    Posts
    9,209
    Stay away from the lee breech lock, I have one and they are just a bad design, it's not a matter of if it will fail but when.
    I didn't take advice given on here and got bitten when the one I bought had stress cracks in the lever setup, sure was only $40 to replace those parts but that's a bit to swallow when it's only a $5 part but freighting out of the USA rapes you blind.
    I could've bought a RCBS for not much more.......












    In short "it's shit"
    7mm Rem Mag likes this.

  3. #3
    Member
    Join Date
    Apr 2012
    Location
    canterbury
    Posts
    1,644
    Save a little more , will be better in long run
    dannyb likes this.

  4. #4
    Member
    Join Date
    Jul 2014
    Location
    BOP
    Posts
    4,025
    Of the two I think the RCBS is better quality even if it is a bit dearer. My old RCBS press I bought in the early 70 s is still going strong many thousands of rounds later.

  5. #5
    Member
    Join Date
    Mar 2017
    Location
    Marlborough
    Posts
    1,475
    @longrange, when you say save a bit more. Do you mean more than $200 or go for the partner press. Happy to buy that one any way as it's under $20 and not much more than the Lee.

  6. #6
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,797
    my LEE o ring??? press has never looked like letting me down,the dies screw into the frame,non of this quick release crap. buy the most solid one you can,they take a lot of punishment over the years,buy once cry once.

  7. #7
    Member Tommy's Avatar
    Join Date
    Nov 2014
    Location
    W-BOP
    Posts
    6,536
    RCBS over Lee anything. My RCBS press is older than me, and I'm more worn out than it is
    shooternz and csmiffy like this.
    Identify your target beyond all doubt

  8. #8
    Member
    Join Date
    Mar 2017
    Location
    Marlborough
    Posts
    1,475
    Is yours the Partner press or the rock chucker?

  9. #9
    Member Cordite's Avatar
    Join Date
    May 2017
    Location
    NZ Mainland (Dunedin)
    Posts
    5,531
    Lee is angry fire engine red, while RCBS is a calming, green colour.

    The companies should merge, sell NATO green presses with red bolt fastenings. A cool combination.

  10. #10
    Member
    Join Date
    Dec 2013
    Location
    Tokoroa
    Posts
    1,221
    The RCBS partner is better than the Lee but not as good as the Rockchucker my Rockchucker was born in 1965 still tight as ever
    the Lee linkage on some models is prone to breaking as it is made from cast alloy
    you won't good wrong with the RCBS partner

  11. #11
    Full of shit Ryan_Songhurst's Avatar
    Join Date
    Sep 2015
    Location
    South Island
    Posts
    10,312
    Right.. im gonna add my "its shit" opinion..

    A few years back when I first started reloading I bought an RCBS rockchucker, supposedly one of the toughest simple presses out there.
    It did about 100 rounds of 260rem before the complete body of the press developed a crack and broke right through.
    I pissed around trying to get it replaced but it seemed everyone wanted to believe that I had run it over with a truck rather than it just broke (because it was shit...)
    I bought a lee breachlock press to use in the meantime whilst still holding out hope the RCBS would be replaced or refunded.
    The RCBS is still sitting in a box in my garage somewhere and I have now been using the "el cheapo" Lee press for about two years and have loaded a tonne of rounds with it without any problems.
    Micky Duck and csmiffy like this.
    270 is a harmonic divisor number[1]
    270 is the fourth number that is divisible by its average integer divisor[2]
    270 is a practical number, by the second definition
    The sum of the coprime counts for the first 29 integers is 270
    270 is a sparsely totient number, the largest integer with 72 as its totient
    Given 6 elements, there are 270 square permutations[3]
    10! has 270 divisors
    270 is the smallest positive integer that has divisors ending by digits 1, 2, …, 9.

  12. #12
    Member john m's Avatar
    Join Date
    Nov 2012
    Location
    horohoro
    Posts
    802
    Ummm
    Name:  20190223_110505.jpg
Views: 367
Size:  4.06 MB
    WillB and Cordite like this.
    Velocity is thrilling,but diameter does the real killing.

  13. #13
    Member
    Join Date
    Jul 2012
    Location
    North Shore Auck
    Posts
    643
    The thing to realise is that the Press is the " Heart " of your reloading system . And that you need to decide what you want it for ? . The two options are effectively High volume / Simplicity of some form of turret / multi station press or , Precision / Low volume setup of a single station press .
    So if you buy once you will only cry once , a good press will outlast your lifetime . So one possibility is to buy the cheapest C press , Lee make a decent one , and use that untill the funds allow you to buy what you really want so that your not getting all frustrated waiting for that once in a life time buy .
    Sideshow and WillB like this.

  14. #14
    Member
    Join Date
    May 2015
    Location
    Rolleston
    Posts
    559
    The two you mention are both low end. Treated with care they will last, but as a beginner you often strain them more than once you know what you’re doing and have learnt a few tricks. Much of a muchness, but ideally get someone to help you along the way.

    I also don’t understand the fascination with press tightness. Lee float on purpose (as do Forster co-ax, likely best there is), and with good reason.
    Sideshow likes this.

  15. #15
    Member
    Join Date
    Mar 2017
    Location
    Marlborough
    Posts
    1,475
    Cheers for the replies. I want a single stage, won't be loading heaps maybe a 100-200 per year of 300wsm, want to load for my 223 also so maybe more rounds for that as my wife loves shooting it. I want consistency with loads. @tikka has been helping me with learning.

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!