Has anyone got a spare .289 and .290 bushing for redding dies spare and they will part with?
I have put mine in a safe place and it worked out a bit too safe😆
Forster bushings work as well.
Cheers in advance
Sent from my SM-G900F using Tapatalk
Has anyone got a spare .289 and .290 bushing for redding dies spare and they will part with?
I have put mine in a safe place and it worked out a bit too safe😆
Forster bushings work as well.
Cheers in advance
Sent from my SM-G900F using Tapatalk
Do what ya want! Ya will anyway.
Keep or borrow? Have 290 may have 2 of them?
might have one ill check
Dont waste your time chasing every last fps, it doesnt matter in the real world, it wont make a difference, all it will do is cause head aches and frustrations. And dont listen to silly old cunts
288,289,292 is what ive got
Dont waste your time chasing every last fps, it doesnt matter in the real world, it wont make a difference, all it will do is cause head aches and frustrations. And dont listen to silly old cunts
Cool!
Sent from my SM-G900F using Tapatalk
Do what ya want! Ya will anyway.
Whats the deal with these dies? Are they a neck sizing? I assume the different bushing sizes give different neck tension. What is there to be had/gained by this or is it purely to fit your individual chamber better?
They can neck size to what ever you want or FL size with a few extra twists of the die.
Do what ya want! Ya will anyway.
How do you decide which bushing you need?
Is it just using one thats 2thou under your loaded measurement or more trialling with several over a wider range?
Yes you can but I don't bump till I need it and wind it out a fraction so I am just neck sizing.
Do what ya want! Ya will anyway.
So yours would be the full length die?
I want to get a bushing die but not sure if go for full length which I normally use or get neck size and body/bump die.
Bookmarks