Thread: Reloading Manuals...

Ok, now I've got the basics, it'd probably be worth getting a manual or two...

ADI would make sense I figure - $9.95 and $28.10 shipping. Someone should tell them about the internet, and pdf's and stuff.

What should I get first (and then second, third etc...)?

Anyone tried these? https://www.amazon.com/Book-Caliber-.../dp/B000VK1QDO

find OLD Nosler manual....Ive got 2nd and third editions.......Nick Harvey early manuals
now you DONT WANT THESE FOR LOAD DATA.....sure you can use it for double checking etc you want it for the whole front section..the HOW TO AND WHY TO do stuff.... data is online from winchester ,adi,hogdgon,and many others...I ALWAYS check any load from 3 sources.....

ADI data is on their website

If you only reload for a few calibers it might be worth considering the Hornady reloading app. You can purchase the load data for the ones you want at about $2-3 each IIRC. Screenshot the loads you want, print em off if you want a hard copy.

you can get that FOR FREE....off website,screen shot and print....

I have the adi one the lee one and the hodgdon one

The Lee book is good, print the ADI powder equivalent tables off from their site and keep with your Lee and other American books. ADI supplies several powders to the US which get rebranded but, barring batch differences, are close enough for load data to be common. Ones they give as equivalent that they do not make you need to be more careful and pay good attention to the manufacturer's load data. Don't think to just substitute one powder's data for another. Finally, be very wary of load data from any forum including this one. Triangulate and compare as much as possible. Until you get plenty of experience, manufacturer's data is all you can really trust. Either powder or bullet manufacturers.

Old manuals from the 60s and 70s are a treasure trove of infomation on all aspects of reloading and troubleshooting techniques and I would highly recommend owning several. The principle of reloading hasn't changed in that time and they went to great lengths to detail the process involved, great for learners.

Yip, absolutely
Ive got 4 or 5 old manuals, and a few months back bought a new Hornady manual. Apart from a few new loads and calibres, all of the "how to" info is pretty much a reprint.
In hindsight, the old manuals for info purposes if you can find them, and a website search/screenshot for up to date loads is the way to go

Lyman 50th is the best all rounder I reckon. It's largely brand agnostic.

The most important bit, if you don't have a mentor (and even then if they're just going to teach you their bad habits), is the first section which covers reloading methodology before you even get into the data.

As for the data, you can get it online for free. Collect and cross reference plenty of sources. I keep a bunch here.

Ok, got Nick Harvey.

Now to track down a Lee manual.

yes...indeed,as I said in my earlier post...the main value is the how to and why sections....and triple check data..... three separate sources of information.
one classic is the load data for 270 differs from what he has written in text....to be sure the text is talking about worked up loads but Ive always found that bit interesting...speer 170grn round nose is mentioned in text specifically .