Thread: Reloading set up

Originally Posted by Cigar

As Micky says a powder trickler trickles powder into the pan on the scales - this is different from a powder measure, which dumps a set volume of powder into the case.
I use the Lee scoops or plastic kitchen measuring spoons to put about, but not quite enough, powder into the pan (you can also use a powder measure to do this), then use the trickler to add granules until the scales are balanced. I used to do it by tapping a teaspoon but find the trickler easier and faster.

I have never used a turret press so feel free to ignore this bit
Several people have told me that turret presses have too much flex for full length sizing magnum cases. For non-magnum calibres they are probably fine. For most of my rifles I neck size rather than full length, which puts bugger all strain on the press.

Ohhh good point. I've never loaded magnum so couldn't answer that. The turreted presses are quite s bit faster and lee is the only one available when I bought. Next step up is dillon gear and I don't shoot enough to justify it.

OP, do you know anybody that reloads? Getting an idea of set ups and how they operate might help you decide which way you want to go.

I started reloading last year with help from a friend that has been reloading for 20+years and he told me not to buy a kit as half the stuff is crap you don't need and you end up replacing anyway.so i ended up getting a lee classic cast press,Rcbs m1000 scales and some verniers and thats what i started with and have gradually brought more bits as i go.