Thread: Reloading subsonic 7.62x39

Originally Posted by brent17

Thank you for all your posts. It’s quite daunting trying to get a subsonic load. I think I’ll try AR2206H at 60% with a crony. I’ll also make up some 50% loads. If the crony speed is quite high I’ll try the 50% loads. And definitely make sure I look down the barrel for a in cleared projectile. I was going to use a suppressor but on prev advice. I won’t. And I will look for any signs of bullet tumbling. I feel like buying a cheap norinco for this job. I would hate to ruin a ruger ranch rifle 🤔 Thanks to everyone that has posted here. I really appreciate your time to post. And help me with this project. Cheers Brent

No problem. On reflection, I think if the 4895 60% load wont work, then trailboss likely will.