Been searching for info and found 65grn of rl22 and 160grn projectile. So would it be safe to say start at 63 and work up using a 162eldm hornady brass and cci 250 primers. I was using 69.5 of rl25 but run out. thanks for the help team
Printable View
Been searching for info and found 65grn of rl22 and 160grn projectile. So would it be safe to say start at 63 and work up using a 162eldm hornady brass and cci 250 primers. I was using 69.5 of rl25 but run out. thanks for the help team
Alliant suggest reducing their listed loads by 10% to establish a starting load. I think you will be ok to treat the 162gn as a 160gn for starting load purposes.
Sent from my SM-G986B using Tapatalk
https://uploads.tapatalk-cdn.com/202...027b5c5fca.jpg
I have used 64 grains of RL19 and a 162. It is a good load. I reckon 67 gns of RL22 is about where you want to be. Agree that you should Start at 63-64 grains. Increase in 1 grain increments.