Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Night Vision NZ Terminator


User Tag List

+ Reply to Thread
Results 1 to 10 of 10
Like Tree2Likes
  • 1 Post By Proudkiwi
  • 1 Post By Kiwi Greg

Thread: RmmRM Load Development Question

  1. #1
    Numzane Spudattack's Avatar
    Join Date
    Aug 2012
    Location
    Tauranga
    Posts
    2,990

    RmmRM Load Development Question

    Hey Guys

    Headed to the range this weekend with the chronograph and some loads I am developing for the 7mmRM.

    Below are the results and details of the tests.



    Calibre 7mm Rem Mag
    Projectile 162gr Hornady A-Max
    Cases Winchester
    Primers Federal Large Magnum
    Powder AR2213SC

    Cases neck sized and trimmed to length
    OAL 83.57mm

    Starting Load 60gr
    Max Load 64gr

    Load Shot MV Ave MV Group Size Notes
    60gr 1 2659 2658 29mm Cloverleaf
    2 2658
    3 2657

    61gr 1 2705 2703 19mm Perfect cloverleaf
    2 2700
    3 2703

    62gr 1 2780 2771 28mm horizontal evenly spaced string
    2 2758
    3 2774

    63gr 1 2785 2792 40mm 2 touching, 1 flyer possible human error or velocity diff?
    2 2785
    3 2806

    64gr 1 2846 2846 42mm Pressure signs, heavy bolt lift, cratered primers
    2 2845
    3 2846

    The 61 gr load produced the smallest group and most consistent MV, however the 63gr load had 2 touching with 1 flyer with a significand diff in MV.

    My concern is the low velocities being produced especially with the max load showing pressure signs and should I persevere with the 63gr load or just be happy with the 61gr load at 2700fps?

    Your guys input would be greatly appreciated!
    Last edited by Spudattack; 21-01-2013 at 05:30 PM.
    "Here's the deal I'm the best there is. Plain and simple. I wake up in the morning and I piss excellence."

  2. #2
    Numzane Spudattack's Avatar
    Join Date
    Aug 2012
    Location
    Tauranga
    Posts
    2,990
    Sorry, battling to get the columns to line up!
    "Here's the deal I'm the best there is. Plain and simple. I wake up in the morning and I piss excellence."

  3. #3
    Gone But Not Forgotten Toby's Avatar
    Join Date
    Sep 2012
    Location
    Wouldn't you like to know
    Posts
    11,099
    Maybe you didn't have the same load in the flyer with 63gr, load up another 10 or so and try it out if it doesn't work any good then I would stick to 61.
    VIVA LA HOWA

  4. #4
    Member
    Join Date
    Dec 2011
    Location
    Hamilton
    Posts
    1,829
    I personally wouldnt be happy with an average 2700fps out of a 7mmRM. There are 7/08's getting that sort of velocity running the 162's.
    tui_man2 likes this.

  5. #5
    Terminator Products Kiwi Greg's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    6,701
    The powder you are using is too fast, try 2217 or 2225
    DAF likes this.
    Contact me for reloading components, brass, projectiles, powder, primers, etc

    http://terminatorproducts.co.nz/

    http://www.youtube.com/user/Terminat...?feature=guide

  6. #6
    Caretaker
    Join Date
    Dec 2011
    Location
    Hawkes Bay
    Posts
    9,306

    RmmRM Load Development Question

    Quote Originally Posted by Kiwi Greg View Post
    The powder you are using is too fast, try 2217 or 2225
    +1
    A big fast bullet beats a little fast bullet every time

  7. #7
    Member
    Join Date
    Dec 2011
    Location
    Balclutha, South Otago.
    Posts
    168
    What rifle is it? Also how long is your barrel?

    I'm getting 2980fps out of a 24" barrel tikka using 70g of 2217. grouping about 0.55-0.6 moa

    I was recommended 2213 when I started reloading and got up to 68g @ 2900 before I started getting pressure signs.

  8. #8
    Member Bryan's Avatar
    Join Date
    Dec 2011
    Location
    Tauranga
    Posts
    881
    I agree 100% with Kiwi Greg, 2213sc is too fast for the 7mmRM. 2217 or 2225 are the 'go to' powders for the Rem Mag.
    Hunting is not a hobby.....its an addiction

  9. #9
    Link
    Join Date
    Jan 2013
    Location
    Canterbury
    Posts
    211
    Agree with what's already been said with regards to 2217.
    73.5 grains with 162 Amax seated 5 thou off the lands gives me 3070fps out of my sendero

  10. #10
    Numzane Spudattack's Avatar
    Join Date
    Aug 2012
    Location
    Tauranga
    Posts
    2,990
    Cheers guys, sorry been away from the pc, it is a S/S Weatherby Vanguard with a 24" barrel and 1:9.5 twist..

    Yeah was feeling a bit disconcerted about the velocities, will get a can of 2217 this week and load up another batch.

    Appreciate the help!
    "Here's the deal I'm the best there is. Plain and simple. I wake up in the morning and I piss excellence."

 

 

Similar Threads

  1. ADI 308 Projectiles / Load development
    By Tertle in forum Reloading and Ballistics
    Replies: 28
    Last Post: 12-06-2014, 08:15 PM
  2. Load development / Ladder test
    By ebf in forum Reloading and Ballistics
    Replies: 15
    Last Post: 17-01-2013, 01:39 PM
  3. Remington r15 load
    By DAVE.H in forum Reloading and Ballistics
    Replies: 4
    Last Post: 13-01-2013, 03:25 PM
  4. load deveoplement for 243
    By falconhell in forum Reloading and Ballistics
    Replies: 10
    Last Post: 12-08-2012, 07:54 PM
  5. I have problems (of the load development kind)
    By Kitto in forum Reloading and Ballistics
    Replies: 18
    Last Post: 19-04-2012, 12:23 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!