Thread: Rpr 6.5 load

Just trying to short cut to a good load for the 6.5 gaymore using the 143eldx.
Any ideas you knowledgeable lot?

Sent from my SM-G950F using Tapatalk

Originally Posted by andyanimal31

Just trying to short cut to a good load for the 6.5 gaymore using the 143eldx.
Any ideas you knowledgeable lot?

Sent from my SM-G950F using Tapatalk

I used RL26 in my Creedmoor which @buzzman now has.
You maybe able to decipher my notes below.

Sent from my CPH1903 using Tapatalk

What is a gaymore !?

Originally Posted by Woody

What is a gaymore !?

It's taken the place of the 7mm08 as a favourite latte drinkers chambering.
Soon to be replaced the the 6.5prc

Sent from my SM-G950F using Tapatalk

42.5 of 2209, or 44.7 of Superformance. No obvious gain from using SPF so I stick with the 2209 cos its usually much easier to get hold of.

Originally Posted by Husky1600

42.5 of 2209, or 44.7 of Superformance. No obvious gain from using SPF so I stick with the 2209 cos its usually much easier to get hold of.

So husky, are you running the rpr and yes I agree about 2209.
I been looking hard at that 6.5staball though!

Sent from my SM-G950F using Tapatalk

Originally Posted by andyanimal31

So husky, are you running the rpr and yes I agree about 2209.
I been looking hard at that 6.5staball though!

Sent from my SM-G950F using Tapatalk

Yup, running an RPR, chrony tells me its doing 2653 fps, but validation shows its a bit faster. Shot out to 1400 no problem, so boringly bloody accurate!

Originally Posted by Husky1600

Yup, running an RPR, chrony tells me its doing 2653 fps, but validation shows its a bit faster. Shot out to 1400 no problem, so boringly bloody accurate!

Very cool!
I will be making some up.
What brass primers and OAL are you using?

Sent from my SM-G950F using Tapatalk

Originally Posted by andyanimal31

Very cool!
I will be making some up.
What brass primers and OAL are you using?

Sent from my SM-G950F using Tapatalk

Hornady brass, CCI 200 primers, 71.3mmCOAL

Originally Posted by Husky1600

Hornady brass, CCI 200 primers, 71.3mmCOAL

Cool!
I dont have cci primers but plenty of 210m

Sent from my SM-G950F using Tapatalk

Originally Posted by andyanimal31

Cool!
I dont have cci primers but plenty of 210m

Sent from my SM-G950F using Tapatalk

I’ve got some cci you can have mate, I’ll probably never use them.

Do different brand primers really make any difference?
Genuine question

Originally Posted by 25 /08 IMP

I used RL26 in my Creedmoor which @buzzman now has.
You maybe able to decipher my notes below.

Sent from my CPH1903 using Tapatalk

What are your recorded velocities, peak or average over a number of shots?

Sent from my SM-A530F using Tapatalk