Just trying to short cut to a good load for the 6.5 gaymore using the 143eldx.
Any ideas you knowledgeable lot?
Sent from my SM-G950F using Tapatalk
Printable View
Just trying to short cut to a good load for the 6.5 gaymore using the 143eldx.
Any ideas you knowledgeable lot?
Sent from my SM-G950F using Tapatalk
I used RL26 in my Creedmoor which @buzzman now has.Quote:
Originally Posted by andyanimal31
You maybe able to decipher my notes below.https://uploads.tapatalk-cdn.com/202...acf6a63ee6.jpg
Sent from my CPH1903 using Tapatalk
What is a gaymore !?
It's taken the place of the 7mm08 as a favourite latte drinkers chambering.Quote:
Originally Posted by Woody
Soon to be replaced the the 6.5prc
Sent from my SM-G950F using Tapatalk
42.5 of 2209, or 44.7 of Superformance. No obvious gain from using SPF so I stick with the 2209 cos its usually much easier to get hold of.
So husky, are you running the rpr and yes I agree about 2209.Quote:
Originally Posted by Husky1600
I been looking hard at that 6.5staball though!
Sent from my SM-G950F using Tapatalk
Yup, running an RPR, chrony tells me its doing 2653 fps, but validation shows its a bit faster. Shot out to 1400 no problem, so boringly bloody accurate!Quote:
Originally Posted by andyanimal31
Very cool!Quote:
Originally Posted by Husky1600
I will be making some up.
What brass primers and OAL are you using?
Sent from my SM-G950F using Tapatalk
Hornady brass, CCI 200 primers, 71.3mmCOALQuote:
Originally Posted by andyanimal31
Cool!Quote:
Originally Posted by Husky1600
I dont have cci primers but plenty of 210m
Sent from my SM-G950F using Tapatalk
I’ve got some cci you can have mate, I’ll probably never use them.Quote:
Originally Posted by andyanimal31
Do different brand primers really make any difference?
Genuine question
What are your recorded velocities, peak or average over a number of shots?Quote:
Originally Posted by 25 /08 IMP
Sent from my SM-A530F using Tapatalk