Should I buy this and from here?

Seems well priced...

http://www.natchezss.com/product.cfm...0&src=exrbSrch

Quote:

---

Originally Posted by veitnamcam

yea, been painstakingly weighing out powder on balance beams for years. Frustrating doing anymore than 20 odd. But kept telling myself for the price of a fly in trip I could keep doing it.
Selling a rifle gave me the excuse I needed :)

Sent from my GT-S5360T using Tapatalk 2

---

And the best bit (which I never mentioned) is I don't need to buy one cause now I know where I can borrow one :)
Left the US on the 28th so I suspect VC is right and customs are having a fiddle.

Toby make yourself a dribbler, bit of 25 mm PVC pipe, glue a floor into it drill an angled hole thru it to take a small length of brass tube of small dia, with a small hole drill in the centre, put powder in pipe and turn the brass tube back an forth and it will dribble grains into your scales, experiment with hole dia that the powder falls thru

Quote:

---

Originally Posted by HOWA308

Seems well priced...

http://www.natchezss.com/product.cfm...0&src=exrbSrch

---

That's a good price, best to ship direct or you post with that crowd?

Talk with Jason, Lyman Generation 5 Digital Powder System | Trade Me if you contact him off trade me he may do a few dollars cheap.

ozarkoutdoors2010@hotmail.com